1208 Datasheet, PDF (1/1 Pages) JMK Inc. – Operating Voltage= 250 / 480 VAC 3 PH Wye OperatingCurrentMax= 80, 100amp

Operating Voltage= 250 / 480 VAC 3 PH Wye
OperatingCurrentMax= 80, 100amp
Operating Frequency= 50-60Hz
Temperature Range= -40 to 50 deg. C
Storage Temperature = -55 to 85 deg. C
DieWithstand(Ph to Case)= 1500V~ for 1 Min
DieWithstand (Ph to Ph)= 1500Vdc for 1 min
Leakage Current = 10 mA @ 250 VAC, 60Hz
Discharge after 1.0 sec.= 34V Max
JMK P/N Ordering Information:
80 amp MM-1208-80
100 amp MM-1208-100
1208 SERIES
This filter series is intended to provide very good
common mode and differential insertion loss for
high current 3 phase Wye systems. The compact
size makes it easy to fit into the rear of a 19.0in
equipment rack leaving more space for system
hardware. The standard construction is more than
adequate for most installation environments.
Should your application require operation in a
more severe environment JMK's engineering staff
can easily modify the mechanical construction to
meet the most severe design criteria.
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]