1174 Datasheet, PDF (1/1 Pages) JMK Inc. – Operating Voltage = 115/250 Vac Operating Current Max= 10 amps

Operating Voltage = 115/250 Vac
Operating Current Max= 10 amps
Operating Frequency = 50 - 60Hz
Operating Temperature = -20 to +70oC ** See note below.
Diel Withstand ( L to Case)= 1500V~for 1 Min.
Diel Withstand ( L to L )= TVS Diode protected to
390-430VDC
Leakage current @ 250V~60Hz= 1.0 mA at 250Vac, 50Hz
Max Residual Voltage after 5 secs = 34 Volts Max
Agency Approvals =Pending
1174 SERIES
The 1174 Series was designed to be used
with very high frequency switching power
supplies such as the Vicor "HAM" units.
The specific design of this filter is to con-
trol the conducted emissions to meet the
requirements of EN55022.
** Heat Sink Required
8.7A Operating Current --- 80 C Max.
Heatsink Temperature
9.0A Operating Current --- 75 C Max.
Heatsink Temperature
10.0A Operating Current --- 70 C Max.
Heatsink Temperature
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]