SMBJ170 Datasheet, PDF (1/4 Pages) Jinan Jing Heng Electronics Co., Ltd. – Transient Voltage Suppressor

R
SEMICONDUCTOR
SMBJ5.0 THRU SMBJ170
TRANSIENT VOLTAGE SUPPRESSOR
Reverse Voltage - 5.0 to 170 Volts
PEAK PULSE POWER-600 Watts
FEATURES
600 Watts Pulse capability
Excellent clamping capability
Low incremental surge resistance
Fast response time
High temperature soldering guaranteed: 260 C/10 seconds at terminals
Component inaccordance to RoHS 2002/95/EC and WEEE 2002/96/EC
MECHANICAL DATA
Case: JEDEC SMB(DO-214AA) molded plastic body
Terminals: solder plated ,solderable per MIL-STD-750,method 2026
Polarity: color band denotes cathode except Bipolar
Weight: 0.003ounce,0.093 gram
SMB(DO-214AA)
0.086(2.20)
0.077(1.95)
0.180(4.57)
0.160(4.06)
0.155(3.94)
0.130(3.30)
0.096(2.44)
0.084(2.13)
0.012(0.305)
0.006(0.152)
0.060(1.52)
0.030(0.76)
0.220(5.59)
0.200(5.08)
0.008(0.203)
MAX
Dimensions in inches and (millimeters)
DEVICES FOR BIDIRECTIONAL APPLICATIONS
1. For bi-directional use C or CA suffix for Types SMBJ5.0 through Types SMBJ170.
2. Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating at 25 C ambient temperature unless otherwise specified)
Peak power dissipation(Note 1)
Symbols
PPK
Valuse
Min.600
Units
Watts
Steady state power dissipation at Tj=75 C lead length 0.375"(9.5mm)Note( 2)
PM
2.0
Watts
Peak forward surge current,8.3ms single half sine-wave superimposed
on rated load (JEDEC method)(Note 3)
IFSM
100
Amps
Maximum instantaneous forward voltage at 50.0A for unidirectional only
Operating jumction and storage temperature range
VF
TJ,TSTG
3.5/5.0
-55 to +175
Volts
C
Note: 1.Non repetitive current pulse and derated above TA=25 C,TP=1ms
2.Mounted on copper pads area of (40X40mm)
3.Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
JINAN JINGHENG ELECTRONICS CO., LTD.
13-26
HTTP://WWW.JINGHENGGROUP.COM