5KP110A Datasheet, PDF (1/4 Pages) Jinan Jing Heng Electronics Co., Ltd. – TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR

R
SEMICONDUCTOR
5KP5. 0 THRU 5KP110A
TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR
Reverse Voltage - 5.0 to 110 Volts
PEAK PULSE POWER-5000 Watts
FEATURES
5000 Watts Pulse capability on 10/1000 μs wave form
Excellent clamping capability
Low zener impedance
Fast response time
High temperature soldering guaranteed: 260 C/10 seconds at terminals
Component inaccordance to RoHS 2002/95/EC and WEEE 2002/96/EC
R-6
0.360(9.1)
0.340(8.6)
DIA
1.0(25.4)
MIN
0.360(9.1)
0.340(8.6)
MECHANICAL DATA
Case: R-6 molded plastic body
Terminals: Plated axial lead, solderable per MIL-STD-750,method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.07ounce, 2.1 grams
0.052(1.32)
0.048(1.22)
DIA
1.0(25.4)
MIN
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating at 25 C ambient temperature unless otherwise specified)
Peak power dissipation at TA=25 C,TP=1ms(Note 1.)
Symbols
PPPM
Valuse
Min.5000
Units
Watts
Steady state power dissipation at Tj=75 C lead length 0.375"(9.5mm)(Note 2.)
PD
8.0
Watts
Peak forward surge current,8.3ms single half sine-wave superimposed
on rated load (JEDEC method)(Note 3.)
IFSM
400
Amps
Maximum instantaneous forward voltage at 100A for unidirectional only
Operating jumction and storage temperature range
VF
TJ,TSTG
3.5
-55 to +175
Volts
C
Note: 1.Non repetitive current pulse and derated above TA=25 C
2.Mounted on copper pads area of 0.8X0.8"(20X20mm)
3.Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
JINAN JINGHENG ELECTRONICS CO., LTD.
13-18
HTTP://WWW.JINGHENGGROUP.COM