|
SA5.0A Datasheet, PDF (1/5 Pages) Littelfuse – Silicon Avalanche Diodes - 500 Watt Axial Leaded Transient Voltage Suppressors | |||
|
JIEJIE MICROELECTRONICS CO. , Ltd
SA Series 500W Transient Voltage Suppressor
Rev.2.0
DESCRIPTION:
The SA series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high
power DC bus clamping applications. These devices offer
uni/bi-directional port protection from 5.0 volts to 220 volts.
They provide a clamping voltage lower than the avalanche
voltage. Therefore, any voltage rise due to increased
current conduction is contained to a minimum, providing
the best possible protection level. They can also be
connected in series and/or parallel to create very high
capacity protection solutions.
DO-15
FEATURES:
ï² Low zener impedance.
Symbol
ï² Excellent clamping capability.
ï² Repetition rate (duty cycle): 0.01%.
ï² JEDEC DO-15/DO-204AC Molded Plastic.
ï² Color band denoted cathode except bidirectional.
ï² High temperature soldering: 260â/10s at terminals.
ï² Glass passivated or plannar chip junction in DO-15/DO-204AC package.
ï² 600W Peak Pulse power capability at 10Ã1000μs waveform.
ï² Fast response time: typically less than 1.0ps from 0V to VBR min.
ABSOLUTE MAXIMUM RATINGS (TA=25ºC, RH=45%-75%, unless otherwise noted)
Parameter
Symbol
Peak pulse power dissipation on 10/1000μs
PPP
waveform
Peak pulse current of on 10/1000μs
IPP
waveform
Steady state power dissipation at TL=75â PM(AV)
Operating junction and Storage temperature
range
Peak forward surge current, 8.3ms single
half sine-wave
TSTG, TJ
IFSM
Value
500
See next table
5.0
-55 to +125
100
Unit
W
A
W
â
A
TELï¼+86-513-83639777
- 1 / 5-
http://www.jjwdz.com
|
▷ |