|
ZIOL2201 Datasheet, PDF (1/3 Pages) Integrated Device Technology – Single Channel IO-Link HV Line Driver with Integrated DC/DC Converter | |||
|
Single Channel IO-Link HV Line Driver
ZIOL2201
with Integrated DC/DC Converter
Feature Sheet
Brief Description
The ZIOL2201 is a line driver/level shifter IC that
provides an HV* I/O channel with a wide range of
configurable system features. It addresses the phys-
ical layer of sensor/actuator systems in factory auto-
mation applications, and it is specifically designed to
support the communication standard IO-Link â .
The output driver is a push-pull stage that reaches
an RDSon of less than 6.6⦠at all operational tem-
peratures.
The configuration is stored in an on-chip EEPROM
and automatically loaded into the ZIOL2201âs control
register during power-up. The ZIOL2201 also
provides status information, such as overload and
over-temperature. An integrated SPI interface sup-
ports access to configuration and status registers.
The ZIOL2201 is fabricated in a powerful CMOS
mixed-signal technology allowing supply voltages up
to 40V. EEPROM read/write functionality is guar-
anteed within the entire operating temperature range
in combination with a low-voltage 3.3V core supply.
Features
⢠Configurable output current limitation: 56mA to
410mA
⢠Standard cable driver/ physical layer transceiver
for IO-Link (device)
⢠Slew-rate controlled driver
⢠Wide range for configurable feature set, which is
automatically loaded after power-on reset
⢠Onboard DC/DC converter
⢠IO-Link-specific WURQ⡠detection
⢠On-chip registers and EEPROM for system
configuration and status information
⢠SPI interface for accessing on-chip registers and
EEPROM
⢠Digital interface: 3.3V output, 5V tolerant inputs
⢠IC temperature monitoring/diagnosis
⢠Over-current and over-temperature indication
Benefits
⢠Configurable feature set
⢠Nonvolatile storage of system configuration
⢠Excellent electromagnetic compatibility (EMC)
performance due to adjustable output slew rate
control
⢠Low RDSon of 6.6â¦
⢠Programmable limitation of driver output current
⢠DC/DC converter on-chip
⢠EEPROM read/write functionality within entire
operating temperature range
⢠Space saving 4x4mm² 24-pin QFN
Available Support
⢠Evaluation Kits
⢠Application Notes
Physical Characteristics
⢠Operation temperature -40 to +85 °C
⢠Supply voltage 8.0 to 36.0 V
⢠QFN 24 package 4x4mm
ZIOL2201 Application Circuits
sensor ZIOL2201
SIO Traditional PLC
sensor ZIOL2201
IO-L
ZIOL24x1
actuator ZIOL2201
sensor ZIOL2201
IO-L
ZIOL24x1
IO-Link
PLC
(master)
IO-L
ZIOL24x1
sensor ZIOL2201
* HV: high voltage (maximum power supply / signal swing is 36V).
â IDT is a member of the IO-Link Community: www.io-link.com.
â¡ IO-Link device wake-up.
© 2016 Integrated Device Technology, Inc.
1
January 26, 2016
|
▷ |