IDT74CBTLV3862_14 Datasheet, PDF (1/5 Pages) Integrated Device Technology – LOW-VOLTAGE 10-BIT BUS SWITCH WITH ACTIVE HIGH AND LOW ENABLES

IDT74CBTLV3862
LOW-VOLTAGE 10-BIT BUS SWITCH WITH ACTIVE HIGH AND LOW ENABLES
LOW-VOLTAGE 10-BIT
BUS SWITCH WITH ACTIVE
HIGH AND LOW ENABLES
INDUSTRIAL TEMPERATURE RANGE
IDT74CBTLV3862
FEATURES:
• 5Ω A/B bi-directional switch
• Isolation Under Power-Off Conditions
• Over-voltage tolerant
• Latch-up performance exceeds 100mA
• VCC = 2.3V - 3.6V, normal range
• ESD >2000V per MIL-STD-883, Method 3015; >200V using
machine model (C = 200pF, R = 0)
• Available in SSOP, QSOP, and TSSOP packages
APPLICATIONS:
• 3.3V High Speed Bus Switching and Bus Isolation
DESCRIPTION:
The CBTLV3862 provides ten bits of high-speed bus switching with low
on-state resistance of the switch allowing connections to be made with
minimal propagation delay.
The device is organized as one 10-bit bus switch. The switches are
controlled by independent active-low enable (OE) and active-high enable
(OE) controls.
To ensure the high-impedance state during power up or power down,
OE should be tied to VCC through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking capability of the driver, and
OE should be tied to GND.
FUNCTIONAL BLOCK DIAGRAM
SIMPLIFIED SCHEMATIC, EACH
SWITCH
2
A1
22
SW
B1
11
13
A
B
A10
SW
B10
1
OE
23
OE
OE
OE
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
1
c 2014 Integrated Device Technology, Inc.
DECEMBER 2014
DSC-5264/3