IDT74CBTLV3253_14 Datasheet, PDF (1/5 Pages) Integrated Device Technology – LOW-VOLTAGE DUAL 1-OF-4 MULTIPLEXER/ DEMULTIPLEXER

IDT74CBTLV3253
LOW-VOLTAGE DUAL 1-OF-4 MULTIPLEXER/DEMULTIPLEXER
LOW-VOLTAGE DUAL
1-OF-4 MULTIPLEXER/
DEMULTIPLEXER
INDUSTRIAL TEMPERATURE RANGE
IDT74CBTLV3253
FEATURES:
• Functionally equivalent to QS3253
• 5Ω bi-directional switch connection between two ports
• Isolation under power-off conditions
• Over-voltage tolerant
• Latch-up performance exceeds 100mA
• VCC = 2.3V - 3.6V, Normal Range
• ESD > 2000V per MIL-STD-883, Method 3015;
> 200V using machine model (C = 200pF, R = 0)
• Available in QSOP and TSSOP packages
DESCRIPTION:
The CBTLV3253 is a dual 1-of-4 high-speed multiplexer/demultiplexer.
The low on-state resistance of the switch allows connections to be made with
minimal propagation delay.
The select (S0, S1) input controls the data flow. The multiplexer/
demultiplexer switches are disabled when the output-enable (OE) input is
high.
To ensure that the device is in high-impedance state during power up
or power down, OE should be tied to VCC through a pullup resistor; the
minimum value of the resistor is determined by the current-sinking capability
of the driver.
FUNCTIONAL BLOCK DIAGRAM
1A ⁷
2A ⁹
SW
SW
SW
SW
SW
SW
SW
SW
6
1B1
5
1B2
4
1B3
3
1B4
10
2B1
11
2B2
12
2B3
13
2B4
S0 ¹⁴
S1 ²
1OE ¹
2OE ¹⁵
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
1
© 2014 Integrated Device Technology, Inc.
DECEMBER 2014
DSC-5397/8