JHG320240A Datasheet, PDF (8/26 Pages) Jewel Hill Electronic – SPECIFICATIONS FOR LCD MODULE

JEWEL HILL ELECTRONIC CO.,LTD.
23-24
25
26-27
28-29
30-31
32-33
34
35
36
37
38
39
40
C12+
C12-
VOUT1
C21+
C21-
C22+
C22-
C23+
C23-
C24+
C24-
VOUT2
V0
V1
V2
V3
V4
ESGND
Capacitor+/- Capacitor 2 positive/negative connection pin for
booster1 circuit
VOUT1 is the internal booster output,step-up voltage based on
the difference voltage of VIC&GND
Capacitor+/- Capacitor 3 positive/negative connection pin for
booster2 circuit
Capacitor+/- Capacitor 4 positive/negative connection pin for
booster2 circuit
Capacitor+/- Capacitor 5 positive/negative connection pin for
booster2 circuit
Capacitor+/- Capacitor 6 positive/negative connection pin for
booster2 circuit
VOUT1/ is the internal booster output,step-up voltage based
on the difference voltage of VIC&GND
Built-in driver voltage source output. These pins should be
connected by capacitors
to GND for voltage stabilization
ESD Ground
JHG320240A
VER: 1.0
-7-
Issue date: 2011/04/18