JH241240320A Datasheet, PDF (6/54 Pages) Jewel Hill Electronic – SPECIFICATIONS FOR LCD MODULE

JEWEL HILL ELECTRONIC CO.,LTD.
5. MODULE FUNCTION DESCRIPTION.
Pin No. Symbol
Description
1
GND Power Supply for Ground(0V).
2
VCI Power Supply for Positive(3.0V).
3
VDD Power Supply for Positive(3.0V).
4
/CS Chip Selection
5
RS Data/Command Register Selection
6
RW/SCL Write Signal Input or Read/Write Selection Terminal
7
/RD Read Signal Input or Read/Write Enable Signal Input
SPI interface input pin.
8
SDI The data latched on the rising edage of SCL signal.
Fix to GND level when not in use.
9-26 DB0-D17
Dara ENABLE signal for RGB interface operation.
27 ENABLE Low:Select(access enable)
High:Not select(access inhibited)
Dot clock signal for RGB interface operation.
28
DOTCLK
DPL=”0”:input data on the rising edge of DOTCLK
DPL=”0”:input data on the falling edge of DOTCLK
Fix to GND level when not in use.
Line sunchronizing signal for RGB interface operation.
29
HSYNC
HSPL=”0” Active low .
HSPL=”1”.Active high.
Fix to GND level when not in use.
Frame synchronizing signal for RGB interface operation.
30
VSYNC
VSPL=”0” Active low.
VSPL:”1” Acive high.
Fix to the GND level when not in use.
A reset pin.
31
RESET Initializes the ILI9328 with a low input. Be sure to execute a reset after
Supplying power.
JH241240320A VER: 1.01
-5-
Issue date: 2013/08/01