JH30240400C Datasheet, PDF (16/23 Pages) Jewel Hill Electronic – SPECIFICATIONS FOR LCD MODULE

JEWEL HILL ELECTRONIC CO.,LTD.
No. Item
Inspection Standard
1) Chip on the corner
Classification
of defects
X
Y
Z
≤3.0
≤S
≤T
Remark: S=contact pad length;
T=the thickness of glass
Chips on the corner of terminal shall not be
1 _{Glass defect allowed to extend into the ITO pad or expose}
perimeter seal. Acceptable Quantity N≤2.
2) Chip on the edge of glass
Minor
X
Y
Z
Ignore
≤0.5
≤T
Acceptable Quantity: N≤2
3) Creak
Creaks tend to break are not allowed.
Minor
Minor
JH30240400C VER: 00
- 15 -
Issue date: 2013/08/01