JH32240400B Datasheet, PDF (15/22 Pages) Jewel Hill Electronic – SPECIFICATIONS FOR LCD MODULE

JEWEL HILL ELECTRONIC CO.,LTD.
9) No low temperature bubbles ,end seal loose and fall, frame rainbow, ACF bubble
growing are allowable in the appearance test.
11.INSPECTION CRITERION.
11.1. Sampling Method.
Unless otherwise agreed upon in writing, the sampling inspection shall be applied to the
Customer’s incoming inspection.
1) Lot size: Quantity per shipment lot
2) Sampling type: Normal inspection , single sampling
3) Inspection level: Ⅱ
4) Sampling table: MIL-STD-105D
5) Acceptable Quality Level(AQL): Major=0.65 Minor=1.5
11.2. Inspection Method.
1) Ambient Condition:
a. Temperature: Room temperature 25±5℃
b. Illumination: Single fluorescent lamp non-directive(300 to 700 Lux)
2) Viewing distance
The distance between the LCD and the inspector’s eyes shall be at least 30-50cm.
3) Viewing Angle
The inspection shall be conducted within normal viewing angle range.
11.3. Inspection Criteria.
11.3.1 Major defect
No. Item
Inspection Standard
Classification
of defects
1) No display
2) Display abnormally
All
3) Open or missing segment
1 functional ^{4) Short circuit}
defects
5) Excess power consumption
6) Backlight no lighting, flickering and abnormal
Major
lighting
2
Missing Missing component
Major
Outline Overall outline dimension beyond the drawing is not
3
dimension allowed
11.3.2. Cosmetic Defect.
Major
JH32240400B VER: 0.1
- 14 -
Issue date: 2013/08/01