50SA-181 Datasheet, PDF (1/2 Pages) JFW Industries, Inc. – SWITCH ASSEMBLY

SPECIFICATION SHEET
JFW MODEL 50SA-181
SWITCH ASSEMBLY
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Isolation
RF Input Power
(cold switched)
Switching Speed
Manual Control
Remote Control
Remote Commands
AC Supply
Page 1 of 2
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
DC-18 GHz
Four 1P2T Failsafe Electromechanical RF
Switches
50 Ohms nominal
1.10:1 maximum
1.15:1 maximum
1.20:1 maximum
1.30:1 maximum
1.35:1 maximum
DC-1 GHz
1-4 GHz
4-8 GHz
8-12 GHz
12-18 GHz
0.10 dB maximum
0.15 dB maximum
0.20 dB maximum
0.30 dB maximum
0.35 dB maximum
DC-1 GHz
1-4 GHz
4-8 GHz
8-12 GHz
12-18 GHz
85 dB minimum
80 dB minimum
70 dB minimum
65 dB minimum
60 dB minimum
DC-1 GHz
1-4 GHz
4-8 GHz
8-12 GHz
12-18 GHz
400 Watts average DC-200 MHz
300 Watts average 200-500 MHz
200 Watts average 500-1000 MHz
100 Watts average 1-4 GHz
90 Watts average 4-8 GHz
70 Watts average 8-12 GHz
60 Watts average 12-18 GHz
15 milliseconds
(after command is received and processed)
(3 milliseconds typical processing time)
Keypad and LCD display
Ethernet (10/100) and RS-232
Set Switch
(SSx y)
Read Switch
(RSx)
Identification (IDN)
Change Baud Rate (CBx)
100-240 VAC @ 47-63 Hz
--CONTINUED--
JFW FORM E-7-F REV F