50S-1422 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – 1P2T SOLID STATE RF SWITCH

SPECIFICATION SHEET
JFW MODEL 50S-1422
1P2T SOLID STATE RF SWITCH
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Isolation
Switching Speed
RF Input Power
Control (1 line)
DC Supply
RF Connector
Operating Temperature Range
Storage Temperature Range
Physical Size
100-500 MHz
1P2T
50 Ohms nominal
1.25:1 maximum
0.5 dB maximum
55 dB minimum
40 microseconds
(50% TTL to 10% or 90% RF)
250 Watts average (cold switch)
500 Watts peak (1usec pulse)
100 Watts average (hot switch*)
TTL Low for J1-COM
TTL High for J2-COM
(off port is reflective)
+15 Vdc @ 250 mA
+5 Vdc @ 40 mA
BNC, SMA, TNC or N female
-20ºC to +70ºC
-55ºC to +85ºC
See outline drawing 092-3022
* If switch rate exceeds 1000 cycles per second, external
heatsinking will be required to maintain a maximum case
temperature of +70ºC.
ECR/ECN # DATE
REV APPR / DATE
04/06/2005
BAC 04/06/2005
ECR/ECN # DATE
REV APPR / DATE
Page 1 of 1
JFW FORM E-7-F REV F