50S-1407 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – 1P3T SOLID STATE RF SWITCH

SPECIFICATION SHEET
JFW MODEL 50S-1407
1P3T SOLID STATE RF SWITCH
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Isolation
Switching Speed
RF Input Power
Control Logic (3 Lines)
DC Supply
RF Connector
DC Connector
Operating Temperature Range
Storage Temperature Range
Physical Size
100-500 MHz
1P3T
50 Ohms nominal
1.3:1 maximum
0.5 dB maximum
50 dB minimum
40 microseconds
(50% TTL to specified isolation)
30 microseconds
(50% TTL to -50 dBc ON-OFF)
250 Watts average Cold switch
500 Watts peak
20 Watts average Hot switch
(C1 for J1, C2 for J2, C3 for J3)
TTL Low for "OFF" and reflective
TTL High for "ON"
(Only one line can be TTL "High" at a
time.)
+15 Vdc @ 400 mA nominal
+5 Vdc @ 80 mA nominal
SMA, TNC or N female
solder terminals
-20ºC to +70ºC
-55ºC to +85ºC
See outline drawing 092-4704
ECR/ECN # DATE
REV APPR / DATE
01/21/2005
BAC 01/21/2005
ECR/ECN # DATE
REV APPR / DATE
Page 1 of 1
JFW FORM E-7-F REV F