50S-1352 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – 1P2T SOLID STATE RF SWITCH

SPECIFICATION SHEET
JFW MODEL 50S-1352
1P2T SOLID STATE RF SWITCH
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Isolation
Switching Speed
RF Input Power
Control Logic (1 Line)
DC Supply
DC Connector
RF Connector
Operating Temperature Range
Physical Size
800-2500 MHz
1P2T
50 Ohms nominal
1.3:1 maximum 800-1000MHz
1.4:1 maximum 1000-2500MHz
0.4 dB typical 800-1000MHz
0.5 dB maximum 800-1000MHz
0.6 dB typical 1000-2000MHz
0.7 dB maximum 1000-2000MHz
0.7 dB typical 2000-2500MHz
0.9 dB maximum 2000-2500MHz
50 dB typical 800-1000MHz
45 dB minimum 800-1000MHz
40 dB typical 1000-2500MHz
36 dB minimum 1000-2500MHz
10 microseconds (50% TTL to 10% or 90% RF)
10 microseconds (50% TTL to I.L.)
30 microseconds (50% TTL to Full
Isolation)
50 Watts average (Hot Switchable)
200 Watts peak (1usec pulse)
TTL Low for Common to J1
TTL High for Common to J2
+15Vdc @ 325 mA
+5Vdc @ 40 mA
Solder Terminals
SMA, TNC or N female
-20º to +70º C
See outline drawing 092-3022
ECR/ECN # DATE
REV APPR / DATE
12/23/2003
BAC 12/23/2003
ECR/ECN # DATE
REV APPR / DATE
Page 1 of 1
JFW FORM E-7-F REV F