50S-1256 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – 1P4T SOLID STATE RF SWITCH

SPECIFICATION SHEET
JFW MODEL 50S-1256
1P4T SOLID STATE RF SWITCH
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Isolation
Switching Speed
RF Input Power
Control Logic (4 Lines)
DC Supply
RF Connector
DC Connector
Operating Temperature Range
Storage Temperature Range
Physical Size
30-512 MHz
1P4T Reflective
50 Ohms nominal
1.3:1 maximum
0.55 dB maximum
50 dB minimum
60 microseconds
(50% TTL to 10% or 90% RF)
125 Watts average (Cold switch)
500 Watts peak (1usec pulse)
20 Watts average (Hot switch)
TTL "High" on control line corresponding
to port desired.
TTL "Low" on remaining three ports.
+15 Vdc @ 550 mA nominal
+5 Vdc @ 100 mA nominal
SMA, TNC or N female
Solder Terminals
-40ºC to +125ºC
-55ºC to +125ºC
See outline drawing 092-3948
ECR/ECN # DATE
REV APPR / DATE
01/18/2002
2922 03/13/2002 A
2992 05/14/2002 B
ECR/ECN # DATE
REV APPR / DATE
9999 02/10/2003 C BAC 03/03/2004
Page 1 of 1
JFW FORM E-7-F REV F