50PMA-011 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – TRANSCEIVER TEST SYSTEM

SPECIFICATION SHEET
JFW MODEL 50PMA-011
TRANSCEIVER TEST SYSTEM
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Attenuation Range
Attenuation Accuracy
Isolation (Power Dividers)
RF Input Power
Switching Speed
AC Supply
Manual Control
Control
Remote Commands
RF Connector
Operating Temperature Range
Physical Size
20-500 MHz
17 Port Transceiver Test System
(See Block Diagram 092-5391)
50 Ohms nominal
1.5:1 maximum
30 dB nominal
0-63 dB in 1 dB steps
± 0.3 dB or 2% of programmed
(whichever is greater)
25 dB minimum (port to port)
+17 dBm average
+30 dBm (1dB compression)
10 microseconds typical
(after command is received and processed)
(3 milliseconds typical processing time)
100-240 VAC @ 47-63 Hz
Keypad and LCD display
Ethernet (10/100) and RS-232
Pause
(PAUSEx)
Variable Handover (VHND Av Aw Vx Vy Tz)
Feedback Handover (FHND Av Aw Vx Vy Tz)
Fade Attenuator (FAx y z t)
Feedback Fade
(FFAx y z t)
Set Attenuator (SAx y)
Read Attenuator (RAx)
Change Baud Rate (CBx)
Identification (IDN)
SMA or N female
0º to +70º C
See outline drawing 092-5390
ECR/ECN # DATE
REV APPR / DATE
04/19/2007
BAC 04/19/2007
15789 04/30/2008 A TRS 04/30/2008
15916 05/28/2008 B TRS 05/28/2008
ECR/ECN # DATE
REV APPR / DATE
15968 06/04/2008 C TRS 06/04/2008
16179 08/07/2008 D TRS 08/07/2008
Page 1 of 1
JFW FORM E-7-F REV F