50PA-556 Datasheet, PDF (1/2 Pages) JFW Industries, Inc. – PROGRAMMABLE ATTENUATOR ASSEMBLY

SPECIFICATION SHEET
JFW MODEL 50PA-556
PROGRAMMABLE ATTENUATOR ASSEMBLY
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
Attenuation Range
VSWR
Attenuation Accuracy
(guaranteed monotonic)
Insertion Loss
RF Input Power
Switching Speed
AC Supply
Manual Control
Remote Control
Remote Commands
RF Connector
Operating Temperature Range
700-3000 MHz
Four individually controlled
solid-state programmable attenuators
50 Ohms nominal
0-127 dB in 1 dB steps
1.6:1 maximum
± 0.5 dB or 2%
(whichever is greater)
6.0 dB maximum
+20 dBm average
5 microseconds typical
(after command is received and
processed)
(3 milliseconds typical processing time)
100-240 VAC @ 47-63 Hz
20-Button Keypad and LCD display
RS-232 (9600, 19200, or 38400 Baud)
Ethernet (TCP, 10/100, up to 4 users)
Attenuator Control Commands:
Set Attenuator, Set Attenuator with
Response, Read Attenuator, Set All
Attenuators, Read All Attenuators, Set
Multiple Attenuator, Fade Attenuator,
Variable Handover, Store, Recall
System Commands:
Identification, Pause
-RS-232 Only: Change Baud
-Ethernet Only: Disconnect, Close,
Message, Clear
SMA or N female
0ºC to +50ºC
Page 1 of 2
--CONTINUED--
JFW FORM E-7-F REV F