50PA-520 Datasheet, PDF (1/2 Pages) JFW Industries, Inc. – PROGRAMMABLE ATTENUATOR ASSEMBLY

SPECIFICATION SHEET
JFW MODEL 50PA-520
PROGRAMMABLE ATTENUATOR ASSEMBLY
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
Attenuation Range
VSWR
Attenuation Accuracy
(guaranteed monotonic)
Insertion Loss
RF Input Power
Switching Speed
AC Supply
Manual Control
Remote Control
Remote Commands
200-6000 MHz
Eight individually controlled
solid-state programmable attenuators
50 Ohms nominal
0-95 dB in 1 dB steps
2.0:1 maximum
± 0.50 dB
1-3 dB
± 0.75 dB
4-7 dB
± 1.00 dB
8-11 dB
± 1.25 dB or 4% 12-95 dB
(whichever is greater)
8.0 dB typical
+20 dBm average
+25 dBm (no damage)
1 microsecond typical
(after command is received and
processed)
(3 milliseconds typical processing time)
100-240 VAC @ 47-63 Hz
20-Button Keypad and LCD display
RS-232 (9600, 19200, or 38400 Baud)
Ethernet (TCP, 10/100, up to 4 users)
Attenuator Control Commands:
Set Attenuator, Set Attenuator with
Response, Read Attenuator, Set All
Attenuators, Read All Attenuators, Set
Multiple Attenuator, Fade Attenuator,
Variable Handover, Store, Recall
System Commands:
Identification, Pause
-RS-232 Only: Change Baud
-Ethernet Only: Disconnect, Close,
Message, Clear
Page 1 of 2
--CONTINUED--
JFW FORM E-7-F REV F