50PA-420 Datasheet, PDF (1/2 Pages) JFW Industries, Inc. – LC HANDOVER TEST SYSTEM

SPECIFICATION SHEET
JFW MODEL 50PA-420
LC HANDOVER TEST SYSTEM
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Configuration
Impedance
VSWR
Attenuation Range
Attenuation Accuracy
Insertion Loss
(ANT1-ANT8 to J1 or J2)
Power Divider Isolation
RF Input Power
Switching Speed
AC Supply
Manual Control
Remote Control
Remote Commands
RF Connector
Operating Temperature Range
800-2200 MHz
8 x 2 LC Handover Test System
(See block diagram 092-5588)
50 Ohms nominal
1.5:1 maximum
0-127 dB in 1 dB steps
± 0.4 dB or 2% of programmed
(whichever is greater)
15.5 dB nominal at 800 MHz
18.5 dB nominal at 2200 MHz
25 dB minimum
+20 dBm average
+30 dBm (no damage)
5 microseconds typical
(after command is received and processed)
(3 milliseconds typical processing time)
100-240 VAC @ 47-63 Hz
Keypad and LCD display
Ethernet (10/100) and RS-232
Variable Handover (VHND Av Aw Vx Vy Tz)
Feedback Handover (FHND Av Aw Vx Vy Tz)
Fade Attenuator (FAx y z t)
Feedback Fade
(FFAx y z t)
Pause
(PAUSEx)
Set Attenuator (SAx y)
Read Attenuator (RAx)
Change Baud Rate (CBx)
Identification (IDN)
SMA or N female
0ºC to +50ºC
Page 1 of 2
--CONTINUED--
JFW FORM E-7-F REV F