50PA-411 Datasheet, PDF (1/2 Pages) JFW Industries, Inc. – LC HANDOVER TEST SYSTEM

SPECIFICATION SHEET
JFW MODEL 50PA-411
LC HANDOVER TEST SYSTEM
Frequency Range
Configuration
Impedance
Attenuation Range
Attenuation Steps
VSWR
Attenuation Accuracy
(guaranteed monotonic)
Insertion Loss
Power Divider Isolation
RF Input Power
Switching Speed
AC Supply
Manual Control
Remote Control
Baud Rates (RS-232 mode)
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
800-6000 MHz
16 x 3 LC Handover Test System
(See block diagram 092-5270)
50 Ohms nominal
0-63 dB in 1 dB steps
1, 2, 4, 8, 16 and 32 dB
1.75:1 maximum
1.5:1 typical
1-14 dB ± 0.8 dB
15-63 dB ± 1.0 dB or 4%
ANT1-ANT8 to J1 and ANT9-ANT16 to J3:
34 dB maximum
27 dB typical @ 800 MHz
32 dB typical @ 6000 MHz
ANT1-ANT16 to J2:
38 dB maximum
31 dB typical @ 800 MHz
36 dB typical @ 6000 MHz
20 dB minimum
+20 dBm average
1 microsecond typical
(after command is received and processed)
(3 milliseconds typical processing time)
100-240 VAC @ 47-63 Hz
Keypad and LCD display
Ethernet (10/100) and RS-232
9600, 19200, or 38400 Baud
Page 1 of 2
--CONTINUED--
JFW FORM E-7-F REV F