50PA-366 Datasheet, PDF (1/2 Pages) JFW Industries, Inc. – HANDOVER TEST SYSTEM

SPECIFICATION SHEET
JFW MODEL 50PA-366
HANDOVER TEST SYSTEM
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Attenuation Range
Attenuation Accuracy
(guaranteed monotonic)
Power Divider Isolation
RF Input Power
Switching Speed
AC Supply
Manual Control
Remote Control
Remote Commands
Baud Rates (RS-232 mode)
RF Connector
Temperature Range
Physical Size
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
700-3000 MHz
12 x 6 Handover Test System
See block diagram 092-5539
50 Ohms nominal
1.5:1 typical
1.7:1 maximum
35 dB typical @ 700 MHz
39 dB typical @ 3000 MHz
0-127 dB in 1 dB steps
± 0.5 dB or 2% (typical)
± 0.75 dB or 2% (maximum)
20 dB minimum
1 Watt average
10 microseconds typical
(after command is received and processed)
(3 milliseconds typical processing time)
100-240 VAC @ 47-63 Hz
Keypad and LCD display
Ethernet (10/100) and RS-232
Set Attenuator (SAx y <CR>)
Read Attenuator (RAx <CR>)
Fade Attenuator (FAx y z t <CR>)
Handover
(HNDx y t)
Variable Handover (VHND Av Aw Vx Vy Tz)
Change Baud Rate (CBx <CR>)
Identification (IDN <CR>)
9600, 19200, or 38400 Baud
SMA female
0ºC to +50ºC
See outline drawing 092-5540
Page 1 of 2
--CONTINUED--
JFW FORM E-7-F REV F