50P-1857 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – SOLID STATE PROGRAMMABLE ATTENUATOR

SPECIFICATION SHEET
JFW MODEL 50P-1857
SOLID STATE PROGRAMMABLE ATTENUATOR
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Impedance
Attenuation Range
Attenuation Steps
VSWR
Attenuation Accuracy
(guaranteed monotonic)
Insertion Loss
RF Input Power
Switching Speed
DC Supply
Control Logic (7 Lines)
DC Connector
RF Connector
Operating Temperature Range
Physical Size
200-6000 MHz
50 Ohms nominal
0-95 dB in 1 dB steps
1, 2, 4, 8, 16, 32 and 32 dB
2.0:1 maximum
± 0.50 dB
1-7 dB
± 1.00 dB
8-11 dB
± 1.25 or 4%
12-95 dB
(whichever is greater)
8 dB maximum
3.7 dB typical @ 200 MHz
4.0 dB typical @ 800 MHz
4.8 dB typical @ 2000 MHz
7.5 dB typical @ 6000 MHz
+20 dBm (operating)
+25 dBm (no damage)
1 microsecond maximum
0.7 microseconds typical
+5Vdc @ 50mA nominal
TTL Low for Thru Path
TTL High for Attenuation
T&B #609-1007
SMA female
0ºC to +70ºC
See outline drawing 092-6246
ECR/ECN # DATE
REV APPR / DATE
08/05/2009
CLK 08/05/2009
18188 01/26/2010 A CLK 01/26/2010
ECR/ECN # DATE
Page 1 of 1
JFW FORM E-7-F REV F
REV APPR / DATE