50P-1853 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – SOLID STATE PROGRAMMABLE ATTENUATOR

SPECIFICATION SHEET
JFW MODEL 50P-1853
SOLID STATE PROGRAMMABLE ATTENUATOR
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
Frequency Range
Impedance
Attenuation Range
Attenuation Steps
VSWR
Attenuation Accuracy
(guaranteed monotonic)
Insertion Loss
RF Input Power
Switching Speed
DC Supply
Control Logic (6 Lines)
DC Connector
RF Connector
Operating Temperature Range
Physical Size
200-6000 MHz
50 Ohms nominal
0-63 dB in 1 dB steps
1, 2, 4, 8, 16 and 32 dB
1.8:1 maximum 200-800 MHz
1.5:1 maximum 800-6000 MHz
± 0.50 dB
1-7 dB
± 1.00 dB
8-11 dB
± 1.25 or 4% 12-63 dB
(whichever is greater)
5.5 dB maximum
2.6 dB typical @ 200 MHz
3.0 dB typical @ 800 MHz
3.5 dB typical @ 2000 MHz
5.0 dB typical @ 6000 MHz
+20 dBm (operating)
+25 dBm (no damage)
300 nanoseconds
+5Vdc @ 10mA nominal
TTL Low for Thru Path
TTL High for Attenuation
T&B #609-1007
SMA female
0ºC to +70ºC
See outline drawing 092-5748-03
ECR/ECN # DATE
REV APPR / DATE
11/10/2008
CLK 11/10/2008
17094 04/16/2009 A CLK 04/16/2009
ECR/ECN # DATE
Page 1 of 1
JFW FORM E-7-F REV F
REV APPR / DATE