50MS-192 Datasheet, PDF (1/1 Pages) JFW Industries, Inc. – SOLID STATE MATRIX SWITCH

SPECIFICATION SHEET
JFW MODEL 50MS-192
SOLID STATE MATRIX SWITCH
Frequency Range
Configuration
Impedance
VSWR
Insertion Loss
Isolation
Attenuation Range
Attenuation Accuracy
RF Input Power
Switching Speed
AC Supply
Control (Remote)
Control Connector (Remote)
RF Connector
Temperature Ranges
Physical Size
JFW Industries, Inc.
Phone: [phone]
[e-mail]
www.jfwindustries.com
800-2400 MHz
24 x 3 Non-Blocking Matrix
(See Block Diagram 092-5114)
50 Ohms nominal
1.4:1 typical
1.6:1 maximum
22 dB typical 800-1000MHz
24 dB maximum 800-1000MHz
26 dB typical 1000-2400MHz
28 dB maximum 1000-2400MHz
Input to Input - 20 dB minimum
Input to Output - 50 dB minimum
Output to Output - 50 dB minimum
0-63 dB in 1 dB steps
(Three individually controlled units, one
on each output)
± 0.4 dB or 2% of programmed
+20 dBm average
+27 dBm (no damage)
100 microseconds
(after command is received and processed)
(3 milliseconds typical processing time)
100-240 VAC at 47-63 Hz
Ethernet (10/100) and RS-232
RJ-45 (Ethernet)
DE-9P (RS-232)
N female
Operating: 0ºC to +70ºC
Storage: -55ºC to +85ºC
See outline drawing 092-5113
ECR/ECN # DATE
REV APPR / DATE
04/27/2006
BAC 04/27/2006
15916 05/28/2008 A TRS 05/28/2008
16179 08/07/2008 B TRS 08/07/2008
ECR/ECN # DATE
Page 1 of 1
JFW FORM E-7-F REV F
REV APPR / DATE