PLRXPL-VE-SG4-62-X Datasheet, PDF (20/22 Pages) JDS Uniphase Corporation – RoHS-Compliant 4.25 Gbps 850 nm eSFP Transceivers

ROHS-COMPLIANT 4.25 GBPS 850 NM TRANSCEIVERS
20
Table 6 Diagnostics Data Map
(continued)
Memory Address
Value
Comments
Address (1010001X)(A2h)
101
102
103
104
105
106
107
108
109
110-7
110-6
110-5
110-4
110-3
110-2
110-1
110-0
111
112-119
120-127
128-247
248-255
TX Bias LSB
TX Power MSB
TX Power LSB
RX Power MSB
RX Power LSB
Reserved MSB
Reserved LSB
Reserved MSB
Reserved LSB
Tx Disable State
Soft Tx Disable Control
Reserved
Rate Select State
Soft Rate Select Control
Tx Fault State
LOS State
Data Ready State
Reserved
Optional alarm & warning flag bits
Vendor specific
User/Customer EEPROM
Vendor specific
Measured TX output power AD values
Measured RX input power AD values
For 1st future definition of digitized analog input
For 2nd future definition of digitized analog input
Digital State of Tx Disable Pin
Writing “1” disables laser, this is OR’d with Tx_Disable pin
Digital State of Rate Select Pin
Writing “1” selects high bandwidth. This is OR’d with
the hardware rate select pin.i
Digital State
Digital State
Digital State; “1” until trasnceiver is ready
Reserved
Refer to SFF-8472 rev 9.5
Vendor specific
Field writeable EEPROM
Vendor specific
* During Tx disable, Tx bias and Tx power will not be monitored.
Alarm and warning are latched. The flag registers are cleared when the system (Reads) AND (the alarm/warning condition no longer exists)