English
Language : 

OAB1552-20FP0 Datasheet, PDF (2/3 Pages) JDS Uniphase Corporation – Benchtop Erbium-Doped Fiber Amplifier
BENCHTOP ERBIUM-DOPED FIBER AMPLIFIER
2
Specifications
MODEL
Test band
Amplifier type
Operating wavelength range
Input signal
Saturated output power1
Noise figure2
Small signal gain3
Spectral gain flatness4
Polarization dependent loss (PDL)
Polarization mode dispersion (PMD)
Input/output isolation
Input/output monitors
Input voltage
Power consumption
Packaging
Operating temperature
Storage temperature
Humidity
Dimensions (W x H x D)
Weight
OAB1552 OAB1592 OAB1596 OAB1598 OAB1562 OAB1564
C-band
L-band
L-band
L-band C+L-band C+L-band
Booster
Booster Mid-span Booster
Booster In-line
high power high power access
DWDM
DWDM
1528 to
1565 to
1570 to
1570 to
1530 to 1560 nm
1563 nm
1610 nm 1603 nm 1603 nm
1570 to 1600 nm
Single channel
Multichannel DWDM
Single Channel
>24 dBm
> 22 dBm > 20 dBm > 20 dBm > 19 dBm > 14 dBm
< 5.0 dB
< 5.5 dB < 5.8 dB < 5.5 dB < 6.5 dB < 6.5 dB
> 36 dB
> 29 dB
> 22 dB
>20 dB
> 22 dB > 20 dB
(MS loss ≤ 7 dB)
N/A
N/A
1.7 dB
1.7 dB
N/A
N/A
≤ 0.2 dB
≤ 0.3 dB ≤ 0.3 dB ≤ 0.9 dB ≤ 0.4 dB ≤ 0.4 dB
≤ 0.45 ps
≤ 0.8 ps
≤ 0.9 ps
≤ 0.9 ps
≤ 0.7 ps ≤ 0.7 ps
45/32 dB
40/40 dB 40/40 dB 40/40 dB 40/40 dB 40/40 dB
Yes
100 to 240 V AC, 50 to 60 Hz
90 V A Maximum
Half-rack benchtop and 19-inch rackmount kit
0 to 50 °C
- 40 to 70 °C
Maximum 95 % RH non-condensing from 0 to 45 °C
21.2 x 8.9 x 35.5 cm
> 4 kg
1. Saturated Output Power measured:
At 1550 nm at Pin = - 4 dBm for model 1552
At 1590 nm at Pin = 0 dBm for model 1592 and 1598
At 1590 nm at Pin = - 2 dBm for model 1596
At 1550 nm at Pin = - 4 dBm and at 1590 nm and Pin - 0 dBm for model 1562 and 1564
2. Noise figure measured:
At Pin = - 4 dBm for model 1552 and 1592
At Pin = - 4 dBm for model 1596
At Pin = 0 dBm for model 1598
At Pin = - 20 dBm for model 1562 and 1564
3. Small signal gain measured:
At Pin = -20 dBm for model 1552, 1562, 1564, and 1592
At Pin = -2 dBm for model 1596
At Pin = 0 dBm for model 1598
4. Flatness optimized for:
At Pin = -2 dBm (1570-1603 nm)
At Pin = 0 dBm (1570-1603 nm)