WRT-760DT240B-035 Datasheet, PDF (1/6 Pages) JDS Uniphase Corporation – Path Protected, Client-Side SFP, Multi-Rate,Multi-Protocol, 3R DWDM Transponder

COMMUNICATIONS MODULES & SUBSYSTEMS
Path Protected, Client-Side SFP, Multi-Rate, Multi-Protocol,
3R DWDM Transponder
WaveReady™ Transponder 760
Key Features
• 1+1 protection for network optics, controlled by loss of
signal (LOS) level, loss of lock, or user configurable
power thresholds
• Client-side SFP modules support either single-mode
fiber (SMF) or multimode fiber (MMF)
• Multiple protocols supported at discrete bit rates of
125 Mb/s to 3.125 Gb/s
• Automatic bit-rate detection and reporting
• Remote management via SNMP traps or TL1
• Network optics support 16 ITU wavelengths over
distances up to 100 km without dispersion
compensation or amplification
• Facility loopback on both network and client sides
• 3R functionality at all supported bit rates and protocols
Applications
• Wavelength services
• Metro optical access overlay
• Protected storage area network
(SAN) and GigE extension services
Compliance
• FCC Part 15 (Class A); UL 60950
3rd Edition, December 2000;
CAN/CSA-C22.2 No. 950-95;
NEBS Level 3; GR-63-CORE;
GR-1089-CORE; GR-78-CORE; CE;
IEC 60950; ETS300-386;
EN 55022 (Class B); 73/23/EEC
The WaveReady Transponder 760 (WRT-760) is a multi-rate, multi-protocol,
auto-lock transponder module that translates optical signals between a variety of
client-side interfaces into a long-reach, single-mode, dense wavelength division
multiplexing (DWDM) interface. This module includes path protection, small
form factor pluggable (SFP) modules on the client side, loopback, and 3R
(reshape, retime and re-amplify/regenerate) functionality.
Built-in path protection eliminates the need for extra transponders and protection
devices on protected links, a significant saving in capital expenditure.
SFP modules optimized for a wide range of protocols are available for single-
mode and multimode fiber. Supported protocols include 100Base-FX Ethernet,
Gigabit Ethernet (GigE), ESCON, Fibre channel, FICON, and OC-3 to OC-48.
Supported data rates range from 125 Mb/s to 3.125 Gb/s. The WRT-760's bit-rate
and protocol independence gives service providers the flexibility to meet the
shifting service demands of customers without changing installed equipment.
Full 3R functionality allows multiple WRT-760 modules to be deployed in series for
very long reach applications. Loopback facilitates fault isolation and troubleshooting.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com