|
PLRXXL-SC-S43-C1 Datasheet, PDF (1/18 Pages) JDS Uniphase Corporation – RoHS6/6 compliant, 10GbE / FC SR / SW, 850 nm, commercial temperature range, 10 Gb/s XFP optical transceiver | |||
|
COMMUNICATIONS MODULES & SUBSYSTEMS
RoHS Compliant XFP Optical Transceiver
â850 nm for up to 300m Reach
PLRXXL Series
Applications
⢠Local Area Network (LAN)
⢠Storage Area Network (SAN)
⢠10 Gigabit Ethernet 10GBASE-SR and
10GBASE-SW applications
⢠10G Fibre Channel optical interconnects
⢠Ethernet switches and applications
⢠Fibre Channel switches and applications
Compliance
⢠Compliant with XFP MSA INF8077i
Rev. 4.5
⢠RoHS6/6 compliant
⢠IEEE802.3 2005 Clause 52 standard
⢠10 GFC 1200-MX-SN-I standard
⢠Class 1 Laser Safety
⢠Tested in accordance with Telcordia
GR-468 standard
Key Features
⢠850 nm optical signals for up to 300 m reach over enhanced
multimode ï¬ber
⢠Low power consumption (< 1.5 W max)
⢠0°C to 70°C case temperature operating range
⢠9.95 Gb/s to 10.75 Gb/s serial optical and electrical interface
⢠Durable plastic bail delatch mechanism
⢠LC receptacle optical connector
⢠Bit error rate < 1Ã10-12
⢠Excellent EMI performance
⢠High reliability
⢠Requires only 3.3 V and 1.8 V power supplies
⢠Digital Diagnostic Monitoring support
⢠XFI AC-coupled electrical interface
⢠Support both line and XFI system loopback
The JDSU 10 Gb/s 850 nm XFP optical transceiver is a cost-effective, fully duplex,
high-reliability optoelectronic (O/E) transceiver that transmits and receives stan-
dard compliant high-speed serial 10 Gb/s optical and electrical signals. The JDSU 10
Gb/s XFP optical transceiver provides a single product solution for the IEEE802.3
2005 Clause 52 10GBASE-SR, 10GBASE-SW, and 10GFC optical interconnects that
are used in Telecommunication, Data Communication, and Storage Area Network
applications. The module complies with the 10 Gigabit Small Form Factor Pluggable
(XFP) Multi-Source Agreement (MSA).
The RoHS6/6 compliant XFP optical transceiver features a JDSU 850 nm Vertical
Cavity Surface Emitting Laser (VCSEL) and a PIN photodiode. The XFI electrical
interface uses 10 Gb/s differential data channels for communications to the mod-
ule as speciï¬ed in the 10 Gigabit Small Form Factor Pluggable (XFP) Multi-Source
Agreement (MSA). The transceiverâs MSA compliant âhot-z-pluggableâ mechanical
design provides the system designer a small footprint 10 Gb/s solution and enables
high density front-panel designs with up to 16 10G ports per line card. The JDSU 10
Gb/s XFP optical transceiver is a 850 nm wavelength optical transceiver targeted at
short reach applications. Link lengths greater than 300 m can be achieved on 2000
MHzâ¢km multimode ï¬ber.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
|
▷ |