PLRXPL-VX-S43-23-N Datasheet, PDF (1/22 Pages) JDS Uniphase Corporation – 10 G SFP+ 850 nm Limiting Transceiver, 10 Gigabit Ethernet Compatible

COMMUNICATIONS MODULES & SUBSYSTEMS
10 G SFP+ 850 nm Limiting Transceiver,
10 Gigabit Ethernet Compatible
PLRXPL-Vx-S43-23-N Series
Key Features
• Compatible with 10 G links
• Uses a highly reliable, 850 nm oxide VCSEL
• Lead-free and RoHS 6/6-compliant, with allowed exemptions
• Commercial case operating temperature of 0 – 70°C
• Single 3.3 V power supply
• Low power consumption (typically 450 mW)
• Bit error rate < 1 x 10^-12
• Hot pluggable
Applications
• Intra data center connectivity
- Switch and hub
- Mass storage systems
- Host bus adapters
• Enterprise access interconnect
• High-speed storage interconnect
• Disaster recovery/backup connectivity
• High-speed cluster/grid computing
aggregation
Compliance
• SFF 8431 Revision 3.2
• SFF 8432 Revision 5.0
• SFF 8472 Revision 10.3
• CDRH and IEC60825-1 Class 1 Laser
Eye Safety
• FCC Class B
• ESD Class 2 per MIL-STD 883
• UL 94, V0
• Reliability tested per Telcordia GR-468
The lead-free and RoHS-compliant small form factor pluggable (SFP+)
transceiver from JDSU improves the performance for 10 Gigabit Ethernet
(10 G) applications, and is ideal for high-speed campus and large data center
applications. This transceiver features a highly reliable, 850 nm, oxide, vertical-
cavity surface-emitting laser (VCSEL) coupled to an LC optical connector. The
transceiver is fully compatible with 10GBASE-SR, 10GBASE-SW and 10 G Fibre
Channel specifications at shorter link distances, with internal AC coupling on both
transmit and receive data signals. The all-metal housing design provides low EMI
emissions in demanding 10 G applications and conforms to IPF specifications.
An enhanced digital diagnostic feature set allows for real-time monitoring of
transceiver performance and system stability, and the serial ID allows for customer
and vendor system specific information to be stored in the transceiver. Transmit
disable, loss-of-signal, and transmitter fault functions are also provided. The small
size of the transceiver allows for high-density board designs that, in turn, enable
greater aggregate bandwidth.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com