|
PLRXPL-SX-S43-22-N Datasheet, PDF (1/22 Pages) JDS Uniphase Corporation – 10 G SFP+ 850 nm Limiting Transceiver, 10 Gigabit Ethernet Compliant | |||
|
COMMUNICATIONS MODULES & SUBSYSTEMS
10 G SFP+ 850 nm Limiting Transceiver,
10 Gigabit Ethernet Compliant
PLRXPL-Sx-S43-22-N Series
Key Features
⢠Compliant to industrywide, 10 G link speciï¬cations
⢠Uses a highly reliable, 850 nm oxide VCSEL
⢠Lead-free and RoHS 6/6-compliant, with allowed exemptions
⢠Commercial case operating temperature 0 â 70°C;
extended temperature operating up to 85°
⢠Single 3.3 V power supply
⢠Low power consumption (typically 450 mW)
⢠Bit error rate < 1 x 10-12
⢠Hot pluggable
Applications
⢠High-speed local area networks
- Switches and routers
- Network interface cards
⢠Computer cluster crossconnect systems
⢠Custom high-bandwidth data pipes
Compliance
⢠SFF 8431 Revision 3.2
⢠SFF 8432 Revision 5.0
⢠SFF 8472 Revision 10.3
⢠IEEE 802.3 Clause 52 10GBASE-SR
and 10GBASE-SW
⢠10 G Fibre Channel
⢠CDRH and IEC60825-1 Class 1 Laser
Eye Safety
⢠FCC Class B
⢠ESD Class 2 per MIL-STD 883
Method 3015
⢠UL 94, V0
⢠Reliability tested per Telcordia GR-468
The lead-free and RoHS-compliant small form factor pluggable (SFP+) transceiver
from JDSU improves the performance for 10 Gigabit Ethernet (10 G) applications,
and is ideal for high-speed, local area network applications. This transceiver
features a highly reliable, 850 nm, oxide, vertical-cavity surface-emitting laser
(VCSEL) coupled to an LC optical connector. The transceiver is fully compliant to
10GBASE-SR, 10GBASE-SW and 10 G Fibre Channel speciï¬cations, with internal
AC coupling on both transmit and receive data signals. The all-metal housing
design provides low EMI emissions in demanding 10 G applications and conforms
to IPF speciï¬cations. An enhanced digital diagnostic feature set allows for real-
time monitoring of transceiver performance and system stability, and the serial ID
allows for customer and vendor system information to be stored in the transceiver.
Transmit disable, loss-of-signal, and transmitter fault functions are also provided.
The small size of the transceiver allows for high-density board designs that, in
turn, enable greater total bandwidth.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
|
▷ |