JXP-01LMAB1 Datasheet, PDF (1/16 Pages) JDS Uniphase Corporation – Multiprotocol XFP Optical Transceiver-1310 nm for up to 10 km Reach

Communications modu les & subs ystem S
Multiprotocol XFP Optical Transceiver—1310 nm for up to
10 km Reach
JXP Series
Key Features
• Compliant with SONET OC-192 SR-1, 10 G Ethernet and 10 G
Fibre Channel 10GBASE-LR, and corresponding Forward
Error Correction (FEC) rates from 9.95 Gbps to 11.35 Gbps
• 1310 nm optical signals for up to 10 km reach
• RoHS 6/6 compliant
• Industrial operating case temperature range from
-40˚C to 85˚C
• Low power consumption (< 2.5 W max)
• Excellent EMI performance
• Digital diagnostic monitoring support
• XFI system loopback implemented
Applications
• Wide area network (WAN)
• Local area network (LAN)
• Storage area network (SAN)
• SONET OC-192 applications
• SDH STM-64 applications
• Ethernet switches and applications
• Fibre Channel switches and applications
Compliance
• Telcordia GR-253-CORE standard
• ITU-T G.691 standard
• IEEE 802.3-2005 Clause 52 standard
• 10GFC 1200-SM-LL-L standard
• Class 1 Laser Safety
• Tested in accordance with Telcordia
GR-468
The JDSU 10 Gbps 1310 nm multiprotocol XFP optical transceiver is a fully du-
plexed, integrated fiber optic transceiver that provides a high-speed serial link at
signaling rates from 9.95 to 11.35 Gbps. The module complies with the 10 Gigabit
Small Form Factor Pluggable (XFP) multisource agreement (MSA).
The 1310 nm XFP also complies with Telcordia GR-253-CORE (SONET) OC-192
SR-1 and ITU-T G.691 (SDH) STM-64 I-64.1 for 2 km reach, and IEEE 802.3-2005
Clause 52 (Ethernet) 10GBASE-LR and 10GFC (Fibre Channel) 1200-SM-LL-L
for 10 km reach.
The 10 Gbps multiprotocol XFP optical transceiver integrates the receive and
transmit path on one module. On the transmit side, the 10 Gbps serial data stream
is recovered, retimed, and passed to a laser driver. The laser driver modulates a
1310 nm semicooled external modulated laser (EML), enabling data transmission
over single-mode fiber through an industry standard LC connector. On the re-
ceive side, the 10 Gbps optical data stream is recovered from a PIN photodetector/
transimpedance amplifier, retimed, and passed to an output driver. This module
features a hot-pluggable, XFI-compliant electrical interface.
NORTH AMERICA: 800 498-JDSU (5378)
worldwide : +800 5378-JDSU
WEBSITE: www.jdsu.com