JX2-13SLAA1 Datasheet, PDF (1/3 Pages) JDS Uniphase Corporation – 10GBASE-SR X2 Optical Transceiver

COMMUNICATIONS MODULES & SUBSYSTEMS
10GBASE-SR X2 Optical Transceiver
JX2 Series
Key Features
• 850 nm, up to 300 m over multimode fiber (MMF)
• 10.3125 Gb/s data rate (Ethernet); 10.51875 Gb/s (Fibre Channel)
• 4-bit XAUI differential AC-coupled electrical interface
• Positive power supply operation (1.8 V, 3.3 V)
• 2.8 W typical, 3.6 W maximum
• Low power mode
• Digital diagnostic monitoring
• Single-mode duplex SC optical connector
Applications
• Local Area Networks (LAN)
• Storage Area Networks (SAN)
• Ethernet switches and applications
• Fibre Channel switches and applications
Compliance
• IEEE 802.3ae standard
• 10GFC standard
• X2 MSA Revision 2.0b
• Tested in accordance with Telcordia
GR-468
• Class 1 laser safety
• UL and TUV certified
The JDSU 10GBASE-SR X2 Transceiver is an integrated fiber optic transceiver
that provides a high-speed serial link at a signaling rate of 10.3125 Gb/s for
Ethernet and 10.51875 Gb/s for Fibre Channel. This product complies with the
IEEE 802.3ae 10GBASE-SR standard, the 10G Fibre Channel standard, and the X2
Transceiver Multi-Source Agreement (MSA) (Rev 2.0b).
The transceiver uses a short wavelength (850 nm) VCSEL that enables data
transmission over multi-mode fiber at distances of up to 300 m. This module
features a 4-bit XAUI differential hot-pluggable electrical interface and accepts an
industry standard duplex SC optical connector.
Digital diagnostic monitoring (DDM) is implemented and fully compliant with
X2 DDM architecture. The unit monitors temperature, receive optical power,
transmit optical power, and laser bias current.
Support for longer distances is available. Contact your JDSU Sales Representative.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com