JSH-85L3AA1-10 Datasheet, PDF (1/22 Pages) JDS Uniphase Corporation – 8.5 G Fibre Channel Compliant SFP+ 1310 nm Limiting Transceiver

Communications modules & subs ystem S
8.5 G Fibre Channel Compliant SFP+ 1310 nm
Limiting Transceiver
JSH-85L3Ax1-10 Series
Key Features
• Compliant with 8 G Fibre Channel (FC) link specifications
• FC compatible operation at 4 and 2 G without using rate select
• Uses a highly reliable, 1310 nm distributed-feedback laser
• Lead-free and RoHS 6/6-compliant, with allowed exemptions
• Commercial case operating temperature of 0 – 70°C;
extended temperature operation up to 85°C
• Single 3.3 V power supply
• Low power consumption (typically 695 mW)
• Bit error rate < 1 x 10^-12
• Hot pluggable
Applications
• High-speed storage area networks
- Switches and hubs
- Network interface cards
- Mass storage systems
- Host bus adapters
• Computer cluster crossconnect systems
• Custom high-bandwidth data pipes
Compliance
• SFF 8431 Revision 3.2
• SFF 8432 Revision 5.0
• SFF 8472 Revision 10.3
• FC-PI-4 800-SM-LC-L
• CDRH and IEC60825-1 Class 1 Laser
Eye Safety
• FCC Class B
• ESD Class 2 per MIL-STD 883
Method 3015
• UL 94, V0
• Reliability tested per Telcordia GR-468
The lead-free and RoHS-compliant small form factor pluggable (SFP+) transceiver
from JDSU improves the performance for 8 Gigabit Fibre Channel (8GFC)
applications, and is ideal for high-speed, storage area network applications. This
transceiver features a highly reliable, distributed-feedback (DFB) laser coupled to
an LC optical connector. The transceiver is fully compliant to the FC-PI-4 800-SM-
LC-L variant and is compatible with 400-SM-LC-L and 200-SM-LC-L variants. It
is fully compatible with SFP+ specifications at 8.5 G, 4.25 G and 2.125 G bit rates,
with internal AC coupling on both transmit and receive data signals. The all-metal
housing design provides low EMI emissions in demanding 8.5 G applications and
conforms to IPF specifications. An enhanced digital diagnostic feature set allows
for real-time monitoring of transceiver performance and system stability, and the
serial ID allows for customer and vendor system information to be stored in the
transceiver. Transmit disable, loss-of-signal, and transmitter fault functions are
also provided. The small size of the transceiver allows for high-density system
designs that, in turn, enable greater total bandwidth.
NORTH AMERICA: 800 498-JDSU (5378)
world wide : +800 5378-JDSU
WEBSITE: www.jdsu.com