JSH-01LWAA1 Datasheet, PDF (1/22 Pages) JDS Uniphase Corporation – 10 Gigabit Ethernet SFP+ 1310 nm Limiting Transceiver, 10 km Reach

Communications modules & subs ystem S
10 Gigabit Ethernet SFP+ 1310 nm Limiting Transceiver,
10 km Reach
JSH-01LWAx1 Series
Key Features
• Compliant to 10 G link specifications
• Uses a highly reliable, 1310 nm distributed-feedback laser
• Lead-free and RoHS 6/6-compliant, with allowed exemptions
• Commercial case operating temperature of 0 – 70°C;
extended temperature operation up to 85°C
• Single 3.3 V power supply
• Low power consumption (typically 695 mW)
• Bit error rate < 1 x 10^-12
• Hot pluggable
Applications
• Inter-data-center connectivity
- Enterprise backbones
- Metro access
- Carrier point of presence
• High-speed local area networks
- Switches and routers
- Network interface cards
• High-speed cluster and grid
computing aggregation
• Custom high-bandwidth data pipes
• Disaster recovery and backup
connectivity
The lead-free and RoHS-compliant small form factor pluggable (SFP+) transceiver
from JDSU improves the performance for 10 Gigabit Ethernet (10 G) applications,
and is ideal for high-speed, local area network applications. This transceiver features
a highly reliable, 1310 nm, distributed feedback (DFB) laser coupled to an LC
optical connector. The transceiver is fully compliant to 10GBASE-LR, 10GBASE-
LW and 10 G Fibre Channel specifications, with internal AC coupling on both
transmit and receive data signals. The all-metal housing design provides low EMI
emissions in demanding 10 G applications and conforms to IPF specifications.
An enhanced digital diagnostic feature set allows for real-time monitoring of
transceiver performance and system stability, and the serial ID allows for customer
and vendor system information to be stored in the transceiver. Transmit disable,
loss-of-signal, and transmitter fault functions are also provided. The small size of
the transceiver allows for high-density board designs that, in turn, enable greater
total bandwidth.
Compliance
• SFF 8431 Revision 3.2
• SFF 8432 Revision 5.0
• SFF 8472 Revision 10.3
• IEEE 802.3 Clause 52 10GBASE-LR
and 10GBASE-LW
• 10 G Fibre Channel
• CDRH and IEC60825-1 Class 1 Laser
Eye Safety
• FCC Class B
• ESD Class 2 per MIL-STD 883
Method 3015
• UL 94, V0
• Reliability tested per Telcordia GR-468
NORTH AMERICA: 800 498-JDSU (5378)
world wide : +800 5378-JDSU
WEBSITE: www.jdsu.com