EPM705250NC0 Datasheet, PDF (1/6 Pages) JDS Uniphase Corporation – Forward and Return Path Analog CATV Detector Modules

COMMUNICATIONS COMPONENTS
Forward and Return Path Analog CATV Detector Modules
EPM 7xx Series
Key Features
• Electro-optical
- Low intermodulation distortion
- High responsivity
- Low back reflection
• Packaging
- Single mode 900 µm fiber with or without a connector
- Single mode 250 µm fiber without a connector
Applications
• AM fiber optic CATV receivers to
550 MHz (EPM 705) and 860 MHz
(EPM 745)
• Multi-channel fiber optic transmission
The EPM 7xx series are high quality analog photodetectors designed for forward
path (EPM 745) and return path (EPM 705) AM CATV applications. These
coaxial modules are optically aligned to optimize performance and balance the
parameters of responsivity, distortion and back reflection.
The photodetector die is fabricated with a proprietary InGaAs process in our
wafer fab and assembled into a hermetically-sealed package with an antireflective-
coated lens. A stainless steel bushing is used to actively couple the fiber to the package.
The fiber is reinforced with a rubber boot which relieves fiber bending stresses.
The EPM 7xx series can be produced without a connector or with a variety of
industry standard connectors. They are also available with a mounting bracket
which allows both vertical panel mounting and horizontal flush-to-board mounting.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com