English
Language : 

JCK_15 Datasheet, PDF (1/2 Pages) jb Capacitors Company – SMD Aluminum Electrolytic Capacitor
SMD Aluminum Electrolytic Capacitor – JCK
FEATURES
Ø Chip type, operating with wide temperature range -40~+105℃.
Ø Load Life of 1,000~2,000 hours
Ø Designed for surface mounting on high density circuit board.
Ø Emboss carrier tape packing system is available for automatic insertion.
SPECIFICATIONS
Operating Temperature
Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
-40℃ ~ +105℃
4V ~ 100V.DC
0.1 ~ 10000μF
±20% at 120Hz, 20℃
Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater.
(After 2 minutes application of rated voltage)
Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater.
(After 1 minutes application of rated voltage)
Dissipation Factor (Tan δ)
Measurement Frequency: 120Hz, Temperature: 20℃
Rated Voltage (V)
4
6.3
10
16
Tan δ
Φ4~Φ10
0.35
0.3
0.24
0.2
(Max.) Φ12.5~Φ16
0.42
0.38
0.34
0.3
25
0.16
0.26
35
0.14
0.22
50
0.14
0.18
63
0.12
0.14
100
0.12
0.12
Stability At Low Temp.
Measurement Frequency: 120Hz
Rated Voltage (V)
4
6.3
10 16 25 35 50~63 100
Impedance
Ratio
Φ4~Φ10
Z(-25℃)/ Z(20℃)
7
Z(-40℃)/ Z(20℃) 15
4
8
3
2
2
2
6
4
4
3
2
3
3
4
ZT/Z20
(Max.)
Φ12.5~Φ16
Z(-25℃)/ Z(20℃)
Z(-40℃)/ Z(20℃)
7
17
5
12
4
3
10 8
2
5
2
4
2
3
2
3
Load Life
After 2000 hours (1000hrs. forΦ4~Φ6.3x5.8) application of rated voltage at 105℃,
They meet the characteristics listed below.
Capacitance Change
within ± 20% of initial value for capacitors of 10V or more
(within ± 30% of initial value for capacitors of 4V & 6.3V)
Dissipation Factor 200% or less of initial specified value
Leakage Current Initial specified value or less
Self Life
After leaving capacitors under no load at 105℃ for 1000 hours,
They meet the specified value for load life characteristics listed above.
Resistance to Soldering Heat
DRAWING (Unit: mm)
After reflow soldering and restored at room temperature, they meet the characteristics listed below.
Capacitance Change Within ± 10% of initial value
Dissipation Factor Initial specified value or less
Leakage Current Initial specified value or less
*1 Voltage mark for 6.3V is [6V] *2 Applicable toΦ8x10.5~Φ10
ΦDxL
4x5.4
5x5.4
6.3x5.4 6.3x7.7
8x6.2
8x10.5
A
1.8
2.1
2.4
2.4
3.3
2.9
B
4.3
5.3
6.6
6.6
8.3
8.3
C
4.3
5.3
6.6
6.6
8.3
8.3
E±0.2
1.0
1.3
2.2
2.2
2.2
3.1
L
5.4
5.4
5.4
7.7
6.2
10.5
*3 Applicable toΦ12.5~Φ16
10x10.5 10x13.5 12.5x13.5
3.2
3.2
4.7
10.3
10.3
13.0
10.3
10.3
13.0
4.4
4.4
4.4
10.5
13.5
13.5
12.5x16
4.7
13.0
13.0
4.4
16.0
16x16.5
5.5
17.0
17.0
6.7
16.5
(mm)
16x21.5
5.5
17.0
17.0
6.7
21.5
FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT
Frequency
50Hz
120Hz
300Hz
1KHz
Coefficient
Φ4~Φ10
Φ12.5~Φ16
0.1~68µF
100~3300µF
~68µF
100~680µF
0.70
0.85
0.75
0.8
1.00
1.00
1.00
1.00
1.17
1.08
1.35
1.23
1.36
1.20
1.57
1.34
1000~10000µF
0.85
1.00
1.10
1.13
Please visit our website to get more update data, those data & specification are subject to change without notice.
10KHz~
1.50
1.30
2.00
1.50
1.15
www.jbcapacitors.com www.jbcapacitors.hk
E-mail: info@jbcapacitors.com Tel : (852)2790 5091 Fax: (852)8169 8283