JV75-5.0V Datasheet, PDF (1/2 Pages) Jauch Quartz Gmbh – SMD Voltage Control Crystal Oscillator

Oscillator · VCXO · 5.0 V
actual size
SMD Voltage Control Crystal Oscillator · 7.5 x 5.0 mm
■ two pinout versions available
■ reflow soldering temperature: 260 °C max.
■ ceramic/metal package
RoHS
2002/95/EC
RoHS compliant
Pb free: pins / pads
General Data
type
frequency range
frequency stability over all*
JV75 5.0 V
1.0 ~ 80.0 MHz
± 25ppm* / ± 50ppm
see table 1
current consumption
see table 2
supply voltage V_DC
frequency pulling range min.
5.0 V ± 5%
± 50ppm / ± 100ppm / ± 150ppm^▲
pulling control voltage
2.5 V ± 2.0 V^■
pulling linearity
<10%
temperature operating
-10 °C ~ +70 °C / -40 °C ~ +85 °C
storage
-55 °C ~ +125 °C
output
rise & fall time see table 3
load max.
15pF
current max. 8mA
low level max.
high level min.
standby function
0.1 x V_DC
0.9 x V_DC
yes
start-up time max.
10ms
symmetry at 0.5 x V_DC
45% ~ 55% max.
* not available > 52.0 MHz ^▲on request, if < 52.0 MHz
Table 1: Frequency Stability Code
stability code
B
± 50 ppm
C
± 25 ppm
-10 °C ~ +70 °C O
O
-40 °C ~ +85 °C O
O
• ^{standard O available}
* includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year.
Table 2: Current Consumption max.
Current at 15pF load:
1.0 ~ 17.9 MHz
18.0 ~ 35.9 MHz
36.0 ~ 51.9 MHz
52.0 ~ 80.0 MHz
20 mA
30 mA
40 mA
50 mA
Table 3: Rise & Fall Time max.
5.0 ns: 1.0 ~ 39.9 MHz
4.0 ns: 40.0 ~ 80.0 MHz
■_{Recommendation}
note:
- specific data on request
- rise time: 0.1 V_DC ~ 0.9 V_DC
- fall time: 0.9 V_DC ~ 0.1 V_DC
To avoid phase noise or FM modulation in the output frequency spectrum,
we recommend to feed the Vcontrol input pin by a low source impedance.
Dimensions
7.5 max.
#6 #5 #4
#1 #2 #3
top view
2 x 2.54^±0.1
side view
1.4^±0.1
#1
bottom view
2 x 2.54^±0.1
1.8^±0.1
pad layout
standard
pin connection B
# 1: Vcontrol
# 2: e/d
# 3: ground
# 4: output
# 5: nc
# 6: VDD
optional
pin connection A
# 1: Vcontrol
# 2: nc
# 3: ground
# 4: output
# 5: e/d
# 6: VDD
in mm
Order Information
O
frequency
in MHz
type
frequency stability
supply voltage
pulling range
pin version
in ppm
in Volt
in ppm
option
Oscillator
1.0 ~ 80.0 MHz
JV75
C = ± 25 ppm
B = ± 50 ppm
5.0 = 5.0 V
05 = ±50 ppm
10 = ±100 ppm
15 = ±150 ppm*
B = standard blank = -10°C ~ + 70°C
A = optional T1 = -40°C ~ + 85°C
* on request, if < 52.0 MHz
Example: O 20.0-JV75-B-5.0-10-B (LF = RoHS compliant / Pb free pins or pads)
Jauch Quartz GmbH ^• e-mail: [e-mail]
full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
260209