JV75-3.3V Datasheet, PDF (1/2 Pages) Jauch Quartz Gmbh – SMD Voltage Control Crystal Oscillator

Oscillator · VCXO · 3.3 V
actual size
SMD Voltage Control Crystal Oscillator · 7.5 x 5.0 mm
■ two pinout versions available
■ reflow soldering temperature: 260 °C max.
■ ceramic/metal package
RoHS
2002/95/EC
RoHS compliant
Pb free: pins / pads
General Data
Table 1: Frequency Stability Code
type
JV75 3.3 V
stability code
B
C
frequency range
1.0 ~ 125.0 MHz
± 50 ppm ± 25 ppm
frequency stability over all* ± 25ppm^◆/ ± 50ppm
-10 °C ~ +70 °C O
O
current consumption
see table 1
see table 2
-40 °C ~ +85 °C O
O
• ^{standard O available}
supply voltage V_DC
frequency pulling range min.
pulling control voltage
pulling linearity max.
temperature operating
storage
3.3 V ± 10%
± 50ppm / ± 100ppm^▲/ ± 150ppm^◗
1.65 V ± 1.65 V^■
± 10%
-10 °C ~ +70 °C / -40 °C ~ +85 °C
-40 °C ~ +85 °C
* includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year.
Table 2: Current Consumption max.
Current at 15pF load:
1.0 ~ 29.9 MHz
30.0 ~ 44.9 MHz
45.0 ~ 51.9 MHz
52.0 ~ 125.0 MHz
15 mA
20 mA
25 mA
35 mA
output
rise & fall time
load max.
current max.
low level max.
high level min.
see table 3
15pF
4mA
0.1 x V_DC
0.9 x V_DC
Table 3: Rise & Fall Time max.
6.0 ns: 1.0 ~ 39.9 MHz
5.0 ns: 40.0 ~ 125.0 MHz
note:
- specific data on request
- rise time: 0.1 V_DC ~ 0.9 V_DC
- fall time: 0.9 V_DC ~ 0.1 V_DC
standby function
yes
■_{Recommendation}
start-up time max.
symmetry at 0.5 x V_DC
10ms
45% ~ 55% typ. (40% ~ 60% max.)
To avoid phase noise or FM modulation in the output frequency spectrum,
we recommend to feed the Vcontrol input pin by a low source impedance.
◆_{not available > 52.0 MHz} ▲_{not available > 80.0 MHz} ◗_{on request, if < 52.0 MHz}
Dimensions
7.5 max.
#6 #5 #4
#1 #2 #3
top view
2 x 2.54^±0.1
side view
1.4^±0.1
#1
bottom view
2 x 2.54^±0.1
1.8^±0.1
pad layout
standard
pin connection B
# 1: Vcontrol
# 2: e/d
# 3: ground
# 4: output
# 5: nc
# 6: VDD
optional
pin connection A
# 1: Vcontrol
# 2: nc
# 3: ground
# 4: output
# 5: e/d
# 6: VDD
in mm
Order Information
O
frequency
in MHz
type
frequency stability
supply voltage
pulling range
pin version
in ppm
in Volt
in ppm
option
Oscillator 1.0 ~ 125.0 MHz
JV75
C = ± 25 ppm^◆
B = ± 50 ppm
3.3 = 3.3 V
◆_{not available > 52.0 MHz}
05 = ±50 ppm
10 = ±100 ppm^▲
15 = ±150 ppm^◗
B = standard
A = optional
▲_{not available > 80.0 MHz}
◗_{on request, if < 52.0 MHz}
blank = -10 °C ~ + 70 °C
T1 = -40 °C ~ + 85 °C
Example: O 20.0-JV75-C-3.3-10-B (LF = RoHS compliant / Pb free pins or pads)
Jauch Quartz GmbH ^• e-mail: [e-mail]
full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
260209