JSO-LC-3.0V Datasheet, PDF (1/4 Pages) Jauch Quartz Gmbh – MEMS-Oscillator

MEMS-Oscillator · JSO LC series · 3.0 V
actual sizes
2016 2520 3225 5032
7050
n low power oscillator with
HCMOS/LVCMOS output
n compatible to industry standard
packages 2016 – 7050
n configured to customer’s specification
n extended shock & vibration resistance
n very fast delivery service
n 500 million hours MTBF
General Data
type
frequency range
JSOxxCxLC 3.0 V
1.0 ~ 110.0 MHz (temp. range T0 ~ T8)
frequency stability over all
current consumption
supply voltage V_DC
temperature operating
storage
115.0 ~ 137.0 MHz (temp. range T0 ~ T1)
±20 ppm ~ ±50 ppm (see table 1)
see table 2
3.0 V ± 10%
T0 = -20°C ~ +70°C
T1 = -40°C ~ +85°C
T2 = -40°C ~ +105°C
T3 = -40°C ~ +125°C
T8 = -55°C ~ +125°C
-55°C ~ +150°C
output
logic
HCMOS/LVCMOS
rise & fall time 3.3 ns max. at 15 pF / 6.2 ns max. at 30 pF (see table 4)
load max. 30 pF max. recommended (≤ 81.0 MHz)
15 pF max. recommended (> 81.0 MHz)
other load capacitances possible, see supplementary document
current max. 4 mA
low level max.
high level min.
standby function (e/d)
0.1 x V_DC
0.9 x V_DC
stop (S), tristate-only (T) or none (N), see table 3
output enable time max.
5 ms (S) / 150 ns (T)
output disable time max.
150 ns
start-up time max.
5 ms
standby current max.
5 µA (for stop (S), see table 3)
phase jitter 12 kHz ~ 20 MHz < 3.0 ps RMS
symmetry at 0.5 x V_DC
45% ~ 55% (standard)
note: some frequencies can’t be configured, see table 5.
Packing Note / Marking
QTY < 250 pcs. ➝ cut tape
QTY 250/500/1K/3K pcs. ➝ tape and reel
Marking: lot code only
RoHS
2011/65/EC
RoHS compliant
Pb free
REACH compliant Conflict mineral free
Table 1: Frequency Stability Code
stability code /
temp. code*
B
G
C
D
±50 ppm ±30 ppm ±25 ppm ±20 ppm
-20°C ~ +70°C T0 O
O
O
O
-40°C ~ +85°C T1 O
O
O
O
-40°C ~ +105°C T2 O
O
O
O
-40°C ~ +125°C T3 O
O
O
O
-55°C ~ +125°C T8 O
O
O
O available
* includes stability at 25°C, operating temp. range, supply voltage change,
shock and vibration, aging 1st year.
Table 2: Current Consumption typ. (for max. add 30%)
current at load
5 pF
15 pF
30 pF
60 pF
unit
output disabled
3.9
3.9
3.9
3.9
mA
1.0 ~ 19.9 MHz
4.1
4.5
5.4
7.2
mA
20.0 ~ 29.9 MHz
4.5
5.4
6.9
10.1
mA
30.0 ~ 49.9 MHz
4.9
6.3
8.6
13.2
mA
50.0 ~ 79.9 MHz
6.1
8.4
12.2
mA
80.0 ~ 110.0 MHz 7.3
10.5
15.5
mA
115.0 ~ 137.0 MHz (9.5)
(14.0)
mA
note: current at default edge control setting “D”, also refer to table 4.
Table 3: Configurable Standby Function Options (e/d)
pin #1 (e/d control) option
functionality
low “0” (V_IL ≤ 0.2 V_DC) S = Stop output weakly pulled down, oscillator in sleep mode
T = TriState output high impedance, oscillator operates
N = None oscillator output active
high “1” (V_IH ≥ 0.8 V_DC) all
open*
all
oscillator output active
oscillator output active
* a pull up resistor is recommended in EMI stressed circuit environments.
Pin Connection
#4 #3
#1 #2
# 4: V_DC
# 1: e/d
# 3: output
# 2: GND
note: a capacitor of 0.1 µF between V_DC and GND is recommended.
Jauch MEMS – Uses SiTime’s MEMS First™ technology
Jauch Quartz GmbH ^• e-mail: [e-mail]
full data can be found under: www.jauch.de / www.jauch.co.uk / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
081214