JPO75-3.3V Datasheet, PDF (1/2 Pages) Jauch Quartz Gmbh – Programmed SMD CMOS Oscillator

Programmed Oscillator · JPO75 · 3.3/2.5V
actual size
Programmed SMD CMOS Oscillator · 7.5 x 5.0 mm
■ fast delivery service
■ tristate function
■ reflow soldering temperature: 260 °C max.
■ RoHS compliant, ceramic/metal package
RoHS
2002/95/EC
RoHS compliant
Pb free: pins / pads
General Data
type
JPO75 3.3 V / 2.5 V
frequency range
3.0 ~ 200.0 MHz (3.3 V, 15 pF)
3.0 ~ 130.0 MHz (2.5 V, 15 pF)
3.0 ~ 80.0 MHz (3.3 V, 30 pF)
3.0 ~ 70.0 MHz (2.5 V, 30 pF)
frequency stability over all* +/-30ppm ~ +/-100ppm (see table 1)
current consumption
see table 2
supply voltage V_DC
temperature operating
3.3 V / 2.5 V +/-10%
-20°C ~ +70°C / -40°C ~ +85°C
storage
-55°C ~ +125°C
output
rise & fall time see table 3
load max.
15pF / 30pF
current max. 8mA (3.3 V) / 4mA (2.5 V)
low level max. 0.4 V
high level min. V_DC - 0.4 V
standby function
tristate (weak pull up)
output enable time max.
100ns
output disable time max.
250ns
start-up time max.
10ms
symmetry at 0.5 x V_DC
45% ~ 55% typ. (40% ~ 60% max. )
Table 1: Frequency Stability Code
stability code
A
B
G
± 100 ppm
-10 °C ~ +70 °C
O
-40 °C ~ +85 °C
O
• ^{standard O available}
± 50 ppm
O
•
± 30 ppm
•
–
* includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year.
Table 2: Current Consumption max.
frequency range
3.0 ~ 70.0 MHz
V_DC =3.3 V
–
V_DC =2.5 V
20 mA
load
at 30 pF
3.0 ~ 80.0 MHz
28 mA
–
at 30 pF
3.0 ~ 130.0 MHz
28 mA
20 mA
at 15 pF
130.0 ~ 200.0 MHz
32 mA
–
at 15 pF
* a ceramics capacitor of 100nF between pin #2 and pin #4 with short distance wiring is strongly recommended
Table 3: Rise & fall time max.
6 ns: 3.0 ~ 70.0 MHz at 30 pF / 2.5 V
5 ns: 3.0 ~ 80.0 MHz at 30 pF / 3.3 V
4 ns: 3.0 ~ 100.0 MHz at 15 pF / 3.3 V & 2.5 V
3 ns: 100.0 ~ 130.0 MHz at 15 pF / 2.5 V & 3.3 V
2 ns: 130.0 ~ 200.0 MHz at 15 pF / 3.3 V
note:
- specific data on request
- rise time: 0.1 V_DC ~ 0.9 V_DC
- fall time: 0.9 V_DC ~ 0.1 V_DC
Dimensions
7.0^±0.15
#4 #3
#1 #2
top view
Order Information
O
frequency
in MHz
side view
1.4^±0.1
#3
#4
#2
#1
5.08^±0.1
bottom view
1.8^±0.1
5.08^±0.1
pad layout
pin connection
# 1: e/d
# 2: ground
# 3: output
# 4: VDC
in mm
type
frequency stability supply voltage
output load
standby function
temp. range
code
code
code
Oscillator 3.0 ~ 200.0 MHz (3.3 V)
3.0 ~ 130.0 MHz (2.5 V)
JPO75
see table 1
3.3 = 3.3 V
2.5 = 2.5 V
1 = 15 pF
2 = 30 pF
TRI = tristate function blank = -20 °C ~ +70 °C
T1 = -40 °C ~ +85 °C
Example: O 125.0-JPO75-B-2.5-1-TRI-T1 (LF = RoHS compliant / Pb free pins or pads)
Jauch Quartz GmbH ^• e-mail: [e-mail]
full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
230908