JO32H Datasheet, PDF (1/2 Pages) Jauch Quartz Gmbh – High Stability Oscillator with Stop Function

Oscillator · JO32H · 3.3 V
actual size
High Stability Oscillator with Stop Function · 3.2 x 2.5 mm
■ low cost high stability SMD oscillator
■ stability meets spec for WiMax and WLAN
■ RoHS compliant, ceramic/metal package
■ reflow soldering temperature: 260 °C max.
RoHS
2002/95/EC
RoHS compliant
Pb free: pins / pads
General Data
type
frequency range
frequency stability over all*
aging 1st year
current consumption
supply voltage V_DC
temperature operating
storage
output
rise & fall time
load max
current max.
low level max.
high level min.
output enable time max.
output disable time max.
JO32H 3.3V
4.0 ~ 54.0 MHz (15pF max.)
± 10ppm ~ ± 20ppm (table 1)
+/-2 ppm max.
7 mA max.
3.3 V ± 10%
-20°C ~ +70°C / -40°C ~ +85°C
-40°C ~ +85°C
5 nsec max.
15pF
4 mA
0.1 x V_DC
0.9 x V_DC
1ms
250ns
start-up time max.
2ms
standby function
stop
standby current max.
5µA
phase jitter 12kHz~20MHz
< 3.0 ps RMS typ.
symmetry at 0.5 x VDC
45% ~ 55% max.
Table 1: Frequency Stability Code
stability code
D
± 20 ppm
E
± 15 ppm
F
± 10 ppm
-20 °C ~ +70 °C O
O
O
-40 °C ~ +85 °C O
O
O
O available
* includes stability at 25°C, operating temp. range, supply voltage change, load change, vibration, aging 1st year
Table 2: Rise & Fall Time max.
5 ns: 4.0 ~ 54.0 MHz
note:
- specific data on request
- rise time: 0.1 V_DC ~ 0.9 V_DC
- fall time: 0.9 V_DC ~ 0.1 V_DC
Enable / Disable Function
pin #1 (e/d control)
pin #3 (output)
open
active
high ”1” (V_IH ≥ 0.7 V_DC)
low ”0” (V_IL ≤ 0.3 V_DC)
active
high impedance
stop function: • oscillator stops / • output high impedance
Dimensions
3.2^±0.1
top view
side view
3.0^±0.1
#1 #2 #3
#6 #5 #4
0.7^±0.1
bottom view
1.0^±0.1
1.6^±0.1
pad layout
Connection
# 1: e/d
# 2: nc
# 3: ground
# 4: output
# 5: nc
# 6: VDC
in mm
Order Information
O
frequency
Oscillator 4.0 ~ 54.0 MHz
type
JO32H
frequency stability
code
see table 1
supply voltage
code
3.3 = 3.3 V
output load
code
1 = 15 pF
Example: O 20.0-JO32H-F-3.3-1-T1 (LF = RoHS compliant / Pb free pins or pads)
option
blank = -20°C ~ +70°C
T1 = -40°C ~ +85°C
Jauch Quartz GmbH ^• e-mail: [e-mail]
full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
171008