JO32H-1.8V Datasheet, PDF (1/2 Pages) Jauch Quartz Gmbh – Oscillator

Oscillator · JO32H · 1.8 V
actual size
High Stability Oscillator with Stop Function · 3.2 x 2.5 mm
■ low cost high stability SMD oscillator
■ stability meets spec for WiMax and WLAN
■ RoHS compliant, ceramic/metal package
■ reflow soldering temperature: 260 °C max.
RoHS
2002/95/EC
RoHS compliant
Pb free: pins / pads
General Data
type
JO32H 1.8V
frequency range
2.50 ~ 60.0 MHz (15 pF max.)
frequency stability over all* ± 8 ppm ~ ± 20 ppm (table 1)
aging 1st year
+/-2 ppm max.
current consumption
5 mA max.
supply voltage V_DC
temperature operating
1.8 V ± 10%
-20 °C ~ +70 °C up to -40 °C ~ +105 °C
storage
-40 °C ~ +85 °C
output
rise & fall time 5 nsec max.
load max
15 pF
current max. 4 mA
low level max. 0.1 x V_DC
high level min. 0.9 x V_DC
output enable time max. 1 ms
output disable time max. 250 ns
start-up time max.
2 ms
standby function
stop
standby current max.
5 µA
jitter
< 3.0 ps RMS typ.
symmetry at 0.5 x VDC
45% ~ 55% max.
Table 1: Frequency Stability Code
stability code
-20 °C ~ +70 °C
-40 °C ~ +85 °C
-40 °C ~ +105 °C
O available
D
± 20 ppm
O
O
O
E
± 15 ppm
O
O
F
± 10 ppm
O
O
H
± 8 ppm
O
* includes stability at 25°C, operating temp. range, supply voltage change, load change, vibration, aging 1st year
Table 2: Rise & Fall Time max.
5 ns: 2.5 ~ 60.0 MHz
note:
- specific data on request
- rise time: 0.1 V_DC ~ 0.9 V_DC
- fall time: 0.9 V_DC ~ 0.1 V_DC
Enable / Disable Function
pin #1 (e/d control)
pin #4 (output)
open
active
high ”1” (V_IH ≥ 0.7 V_DC)
low ”0” (V_IL ≤ 0.3 V_DC)
active
high impedance
stop function: • oscillator stops / • output high impedance
Dimensions
3.2^±0.1
top view
Order Information
side view
3.0^±0.1
#1 #2 #3
#6 #5 #4
0.7^±0.1
bottom view
1.0^±0.1
1.6^±0.1
pad layout
Connection
# 1: e/d
# 2: nc
# 3: ground
# 4: output
# 5: nc
# 6: VDC
in mm
Note: please leave pins # 2, # 5 and the area underneath the package unconnected
O
frequency
Oscillator 2.50 ~ 60.0 MHz
type
JO32H
frequency stability
code
see table 1
supply voltage
code
1.8 = 1.8 V
output load
code
1 = 15 pF
Example: O 20.0-JO32H-F-1.8-1-T1-LF (LF = RoHS compliant / Pb free pins or pads)
option
blank = -20°C ~ +70°C
T1 = -40°C ~ +85°C
T2 = -40°C ~+105°C
Jauch Quartz GmbH ^• e-mail: [e-mail]
full data can be found under: www.jauch.de / www.jauch.co.uk / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
280911-18