FI-JW Datasheet, PDF (2/12 Pages) Japan Aviation Electronics Industry, Ltd. – Fine-Coax Wire Connector for Small Portable Devices

MB-0181-2
General Specifications
„No. of Contacts: 30, 34, 40, 50 pos.
„Pitch: 0.3mm
„Operating Temperature:
-40 Deg. C to +85 Deg. C
„Contact Resistance:
40m ohm max. (initial)
„Durability: 30 mating cycles
„Rated Current: AC, DC each 0.25A per pos.
„Rated Voltage: AC, DC each 50V per pos.
„Insulation Resistance: 100M ohm min.
„Dielectric Withstanding Voltage :
AC 100Vr. m.s per minute
„Applicable Wire: 42 to 44 AWG
Materials and Finishes
Component
Material / Finish
Receptacle (FI-JW**S-VF16)
Contact
Copper alloy / Contact area Au plating over Ni,
Terminal area Au flash plating over Ni
Shell
Insulator
Copper alloy / Contact area Au plating over Ni
Heat resistant plastic UL94V-0
Adsorption Insulator
Heat resistant plastic UL94V-0
Plug (FI-JW**C)
Contact
Copper alloy / Contact area Au plating over Ni,
Terminal area Au flash plating over Ni
Insulator
Heat resistant plastic UL94V-0
Plug / Base Ground Bar (FI-JW**C-BGB-**)
Base Ground Bar
Stainless steel / Contact area Au plating over Ni
Terminal area Sn plating over Ni
Plug / Cover Ground Bar (FI-JW**C-CGB-**)
Cover Ground Bar
Copper alloy / Sn plating over Ni
Plug / Cover Shell (FI-JW**C-SH1)
Cover shell
Stainless steel / Au flash plating over Ni
JAE PMK Div. Proprietary. Copyright ©　2008，Japan Aviation Electronics Industry, Ltd.
2/12