ES3 Datasheet, PDF (2/5 Pages) Japan Aviation Electronics Industry, Ltd. – LED Power Supply Card Edge Type Connector

MB-0221-1
Features
„Low-profile 1.6mm mounting height, designed with consideration for light shielding.
„Insulator is made of white LCP for heat and light resistance.
„Direct connection of converter board and LED mounting board allows for reduced
assembly work time.
„Cable-less connection makes reduction in the number of parts possible.
„SMT type, can be mounted at the same time as other components to the LED
mounting board.
General Specifications
„No. of Contacts: 2 pos.
„Contact Resistance: 60mΩ max. (initial)
„Dielectric Withstanding Voltage: AC 500Vr.m.s (per minute)
„Durability: 20 mating cycles
„Board Insertion Force: 30N max.
„Rated Current: 1A
„Rated Voltage: AC, DC 200V
„Insulation Resistance: 10MΩ min. (after test)
„Operating Temperature: -40 to+105 Deg. C
Materials and Finishes
Component
Insulator
Contact-R
Contact-L
Material / Finish
White LCP
Copper alloy / Sn plating
Copper alloy / Sn plating
Ordering Information
ES3 B 002 W F 1 R****
Series
Reel Product (Note1)
Connection
B: Bottom Mount Type
No. of Contacts
Modification Code
Connection Area Plating
F: Sn plating
Connection to Board
W: SMT straight type, without hold-down
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
2/5