WP6 Datasheet, PDF (1/8 Pages) Japan Aviation Electronics Industry, Ltd. – 0.4mm Pitch, Stacking Type Board-to-Board Connector

COMPONENTS PRODUCT INFORMATION
NEW
0.4mm Pitch, Stacking Type
Board-to-Board Connector
WP6 Series
RoHS Compliant
CONNECTOR
MB-0230-2
March 2014
Plug
Receptacle
The WP6 Series is a low-profile stacking type board-to-board (FPC) connector with
0.4mm pitch spacing that is ideal for high-density mounting in slim information
communication devices like mobile phones, smartphones, and notebook PC.
To satisfy different product function requirements, plug and receptacle with different
heights (mating height: 0.6mm, 0.8mm) are available with the same mounting pattern.
Features
• 0.4mm pitch, 2 rows, stacking height 0.6mm and 0.8mm.
• Contact structure ensures high wear-resistance and high contact reliability.
• Secure hold-downs prevent insulator breakage and peeling from FPC.
• 2-point contact design to resist twisting stress.
• Pb-free. Ni barrier on contact prevents solder wicking.
* Inspection jig connector for both plug and receptacle are available. (Note 1)
General Specifications
No. of Contacts: 10 to 80 pos.
(Please refer to Development Status on the last page
regarding development of contacts.)
Pitch: 0.4mm, 2 rows
Operating Temperature:
-40 Deg. C to +85 Deg. C
Contact Resistance: 70mΩ max (initial)
Life Time: 30 mating cycles
Rated Current:
AC, DC 0.3A each per terminal
Rated Voltage: AC, DC 50V
Insulation Resistance: 100MΩ min. (initial)
Dielectric Withstanding Voltage:
AC250Vr.m.s for 1 minute
Total Insertion Force: 1.5N x n max. (n: No. of pos.)
Total Extraction Force: 0.1N x n min. (n: No. of pos.)
Less than 20 pos. Total Insertion Force: 2.5N x n max. (n: No. of pos.)
Less than 20 pos. Total Extraction Force: 0.2N x n min. (n: No. of pos.)
Note 1) Please contact us for specifications of inspection jig connector.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
1/8