|
ST9S008V4A Datasheet, PDF (1/4 Pages) Japan Aviation Electronics Industry, Ltd. – microSDTM Memory Card Connector | |||
|
COMPONENTS PRODUCT INFORMATION
NEW
microSDTM Memory Card Connector
ST9 Series
CONNECTOR
MB-0177-1
December 2008
RoHSãCompliant
< Outline >
The ST9 Series are one-piece type external connectors for micro SDTM card.
High density SMT mounting type low profile connector compatible with microSDTM
cards, standardized by SDATM (SD Card Association) as a compact card for various
portable devices.
* microSDTM is a trademark of SD Card Association.
Features
ÂPush-push structure normal mounting type connector for microSDTM memory cards,
standardized by SDATM.
ÂBalanced EMI countermeasure by the 4 hold-down points
ÂSlim design with 1.45mm height, 13.7mm width and 15.2mm depth (depth including
card: 17.1mm)
ÂSupply for automatic mounting in embossed tape (Compatible to second reflow)
ÂWith card insertion detection structure (D-SW), Normally open
ÂWith card lock structure
Â1mm push stroke and 3.3mm card eject length
ÂCountermeasure to prevent the card from popping out.
General Specifications
ÂNo. of Contacts :8 pos.+2pos. (D-SW)
ÂContact Resistance: 100m ohm max.
ÂDielectric Withstanding Voltage :
AC500Vr.m.s. per minute
ÂOperating Temperature:
-25 Deg. C to +85 Deg. C
ÂStorage Temperature:
-10 Deg. C to +60 Deg. C
ÂRated Current: 0.5A/ per pin
ÂRated Voltage: 10V/ per pin
ÂInsulation Resistance: 1000M ohm min.
ÂLifetime: 10,000 times
ÂTemperature Rise: 30 Deg. C rise max.
1/4
JAE PMK Div. Proprietary. Copyright © 2007ï¼Japan Aviation Electronics Industry, Ltd.
|
▷ |