|
ST12 Datasheet, PDF (1/5 Pages) Japan Aviation Electronics Industry, Ltd. – microSDTM Memory Card Connector | |||
|
COMPONENTS PRODUCT INFORMATION
NEW
microSDTM Memory Card Connector
ST12 Series
CONNECTOR
MB-0290-1
April 2015
RoHS Compliant
Outline
Smartphones and tablet PCs that equip microSDTM cards are increasing.
The ST12 Series are push-push type connectors compatible with the microSDTM card,
specified by SDA as a compact card for various hand-held devices.
* microSDTM is a trademark of SD Card Association.
Features
ï®Push-push type connector compatible with microSDTM card specified by SDA.
ï®1.4mm height, 13.7mm width, and 15.3mm depth (depth including card: 16.7mm).
ï®Good operability with 0.7mm push stroke, 3.8mm card eject length.
ï®Card insertion detection structure (D-SW), normally open type.
ï®Balanced EMI countermeasure with 7 hold-down points.
ï®Structure to prevent the card from popping out.
ï®Outer-lead type for easy checking and reworking.
ï®Pb-free, halogen-free compliant product.
ï®Supports automated mounting with an embossed tape.
General Specifications
ï®No. of Contacts: 10 pos.
ï®Contact Resistance:
100m ï max. (initial value)
ï®Dielectric Withstanding Voltage:
AC500Vr.m.s. for 1 minute
ï®Operating Temperature:
-25 Deg. C to +85 Deg. C
ï®Rated Current: 0.5A / terminal
ï®Rated Voltage: 10V / terminal
ï®Lifetime: 10,000 times
JAE PMK Div. Proprietary. Copyright © 2015, Japan Aviation Electronics Industry, Ltd.
1/5
|
▷ |