|
ST11-H Datasheet, PDF (1/4 Pages) Japan Aviation Electronics Industry, Ltd. – microSD Memory Card Connector | |||
|
COMPONENTS PRODUCT INFORMATION
NEW
microSDTM Memory Card Connector
ST11-H Series
CONNECTOR
MB-0250-2
March 2013
RoHS Compliant
Overview
The ST11-H Series are one-piece type external connectors for micro SDTM cards.
These connectors are high density, SMT mounting, low profile, push-push type
connectors compatible with the microSDTM card, which is standardized by SDATM as
a compact card for hand-held devices.
* microSDTM is a trademark of SD Card Association.
Features
ï®Push-push structure, standard-mounting connectors for the microSDTM memory card
standardized by SDATM
ï®Balanced EMI countermeasure with 7 hold-down points
ï®Slim design with 1.25mm height, 13.4mm width, and 15.3mm depth (depth including
card: 17mm)
ï®Halogen free, supplied in embossed tape for automatic mounting (compatible with
second reflow)
ï®Card insertion detection structure (D-SW), normally closed type
ï®Card lock structure
ï®1mm push stroke, 3.4mm card eject length
ï®Countermeasure to prevent the card from popping out.
General Specifications
ï®No. of Contacts: 8 pos.+2pos. (D-SW)
ï®Contact Resistance:
100m ï max. (initial value)
ï®Dielectric Withstanding Voltage:
AC500Vr.m.s. per minute
ï®Operating Temperature:
-30 Deg. C to +85 Deg. C
ï®Storage Temperature:
-5 Deg. C to +85 Deg. C
ï®Rated Current: 0.5A / per pin
ï®Rated Voltage: 10V / per pin
ï®Insulation Resistance: 1,000M ï min.
ï®Lifetime: 5,000 times
ï®Card Insertion Force: 40N max.
JAE PMK Div. Proprietary. Copyright © 2013, Japan Aviation Electronics Industry, Ltd.
1/4
|
▷ |